LG SC200 User Manual

Install ManualHECTO Series Screen (HECTO/HECTO2/HECTOB)Please read the safety information carefully before using this product.(Refer to this manual wh

10INSTALLINGAligning the screen by adjusting the screen heightIf you need to adjust the screen height, unscrew the wall brackets and move the refer-en

11INSTALLINGFixing the screen1 On the point that is 310 mm away from the both side edges and 28 mm high from the bottom edge, drill 8 mm holes and att

12INSTALLINGInstalling with Ez BracketInstall the Ez bracket after completing all the screen installations in the order described below. WallAnchorWas

13INSTALLINGWatching imagesWhen all the steps have been completed, the projected image matches the screen, as shown in the gure below. When the proje

14FIXING THE ANCHORS AND SCREWSFIXING THE ANCHORS AND SCREWSFixing the anchors and screws CAUTION yCheck the wall material and thickness of the finish

15SPECIFICATIONSSPECIFICATIONS1275 ± 3 mm(B)2248 ± 5 mm (A)33 ± 1 mm (C)Model name SC200A (width)2248 mm ± 5 mmB (height)1275 mm ± 3 mmC (thickness)33

2SAFETY PRECAUTIONSSAFETY PRECAUTIONSPlease take note of safety instructions to prevent any potential accident or misuse of the product. ySafety prec

3SAFETY PRECAUTIONS yWhen drilling holes into the wall, make sure you use a drill and drill bit with the specified diameter. Ensure that you also fo

4PREPARATIONPREPARATIONAccessoriesCheck the accessories provided with the product.The picture may be different from the actual product. Accessories ar

5PREVIEW OF THE SCREEN INSTALLATIONPREVIEW OF THE SCREEN INSTALLATIONInstallation position The picture may be different from the actual product.410 m

6INSTALLINGINSTALLINGPositioning the screen1 Place the guide paper at a height of 1470 mm from the tabletop. Align the centers of the guide paper and

7INSTALLING2 Drill the holes using the Ф 8 mm drill bit, according to the holes marked on the guide paper. Remove the paper and insert the anchors int

8INSTALLING3 Two people lift the screen and hang it onto the wall bracket while keeping the Up ar-row facing up. (When installing the ceiling type, at

9INSTALLING4 Power on the HECTO*5 Activate the Test Pattern, referring to the user manual.6 When installing with the Ez bracket, make the projected