LG ARNU24GS8R2.ENCALEU User Manual download pdf (Page 13)

Installation Manual 13

ENGLISH

Installation

Installation of Wireless Remote Controller

How to mount onto a wall

How to insert the batteries

1. Remove the battery cover by pulling it according to the arrow direc-

tion.

2. Insert new batteries making sure that the (+) and (-) of battery are

installed correctly.

3. Reattach the cover by sliding it back into position.

1. Always use/replace both batteries of same type.

2. If the system is not to be used for a long time, remove the batteries

to save their working life.

3. If the display screen of remote controller starts, fading replace both

of the batteries.

NOTICE

3) Specification of power source.

4) Confirm that electrical capacity is sufficient.

5) See to that the starting voltage is maintained at more than 90 percent of the rated voltage marked

on the name plate.

6) Confirm that the cable thickness is as specified in the power source specification.

(Particularly note the relation between cable length and thickness.)

7) In a wet or moist area, always install an earth leakage circuit breaker.

8) The following would be caused by voltage drop.

• Vibration of a magnetic switch, which will damage the contact point, fuse breaking, disturbance of the

normal function of the overload.

9) The means for disconnection from a power supply shall be incorporated in the fixed wiring and

have an air gap contact separation of at least 3mm in each active(phase) conductors.

1 ... 12 13 14 ... 23

No comments

LG ARNU24GS8R2.ENCALEU User Manual Page 13