LG 55WFB-N User Manual

OWNER’S MANUALPlease read this manual carefully before operating your set and retain it for future reference.47WFB49WFB55WFBwww.lg.comTransparent Disp

10ENGENGLISHUse M3 screws to mount the monitor. There are 8 positions for screws on the rear side of the product.< Front of the product >< Re

11ENGENGLISHPortrait LayoutTo install in portrait mode, rotate the set clockwise 90 degrees when looking at from the front.The portrait mode is only a

12ENGENGLISHCorrect Method Incorrect MethodStorage Method for Panel ProtectionPanelCushionWhen laying the product on a flat floor, pit it face down on

13ENGENGLISHPRODUCT INSTALLATIONInstalling an LVDS CableThe LVDS cable port is located as shown in the figure below.When installing the product, make

14ENGENGLISH47/55WFB LVDS connection1 Place a soft cloth on the table and put the set on it as illustrated.2 Put a LVDS cable in a holder. Cable head

15ENGENGLISH3 Attach LVDS cable and holder to the set with two screws. (These screws are included with TSP500-M.)4 Cable head has to be toward set bac

16ENGENGLISH49WFB LVDS connection1 Place a soft cloth on the table and put the set on it as illustrated.2 Put a LVDS cable in a holder. Cable head has

17ENGENGLISH3 Attach LVDS cable and holder to the set with two screws. (These screws are included with TSP500-M.)4 Cable head has to be toward set bac

18ENGENGLISHTSP500-M LVDS connection1 Unscrew two screws to assemble LVDS cable and holder. Don’t throw away the screws.2 Put a LVDS cable in a holder

19ENGENGLISH3 Attach LVDS cable and holder to TSP500 with two screws saved in step 1. To prevent the cable from being separated, you must use a hold

2ENGENGLISHCONTENTS3 SAFETY PRECAUTIONS3 Precautions in installing the Product4 Precautions to the AC Adapter and Electrical Power5 Precautions in

20ENGENGLISHLighting InstallationThis product must be installed with backlighting.Lighting must be installed behind the product so that the display ca

21ENGENGLISH<Example of the product in the enclosure><Example of the lighting installation>Lighting must be installed in the enclosure.Ins

22ENGENGLISHPrecautionDo not lift up the product by holding a corner.Do not hold the screen area when holding the product.Use a soft cloth moistened w

23ENGENGLISHTROUBLESHOOTINGAfter-image appears on the product.Problem ResolutionAfter-image appears when the product is turned off. If you use a fixe

24ENGENGLISHSPECIFICATIONSScreen type Liquid Crystal Display (LCD) ScreenDimension (W x H x D) 1176.58 mm x 645.02 mm x 11.2 mmPixel Pitch 0.5415 mm x

25ENGENGLISH(Unit : mm)16-M3 Tap Hole60100.9111013010813062124.11130 222.1130 130130354.24130446.341176.5811.2109.6645.0247WFB33

26ENGENGLISH49WFB55WFB100158130100130122.8690.81001001222.3411.28-M3 Tap Hole11.2168.35130786.7130198.351331.11001001001008-M3 Tap Hole

27ENGENGLISHPin No. Symbol Description NOTE1 VLCDPower Supply+12.0V 12 VLCDPower Supply+12.0V 13 VLCDPower Supply+12.0V 14 VLCDPower Supply+12.0V 15 G

28ENGENGLISHNote: 1. All VLCD (power input) pins should be connected together. 2. All Input levels of LVDS signals are based on the EIA 644 Stand

Make sure to read the Safety Precautions before using the product.The model and serial numbers of the SET are located on the back and one side of the

3ENGENGLISHPlease read these safety precautions carefully before using the product.If you ignore the warning message, you may be seriously injured o

4ENGENGLISHIf you install the product in a place that does not meet the recommended conditions, this may cause serious damage to the product's

5ENGENGLISHWARNINGWARNINGCAUTIONPrecautions in Moving the ProductPrecautions in Using the ProductMake sure to turn off the product. ►You may be elec

6ENGENGLISHCAUTIONDo not put or store inflammable substances near the product. ►There is a danger of explosion or fire due to careless handling of t

7ENGENGLISHINSTALLATION PREPARATIONAccessoriesCheck your product box for the following items. If there are any missing accessories, contact the local

8ENGENGLISH< Front of the product >< Rear of the product >Mounting HolesUse M3 screws to mount the monitor. There are 16 positions for scr

9ENGENGLISH< Front of the product >< Rear of the product >Use M3 screws to mount the monitor. There are 8 positions for screws on the rear