LG 27HJ710S-W User Manual download pdf (Page 44)

ENGLISH

Set ID Function

This function allows you to assign a unique ID to the monitor to control it remotely from your PC.



1 Press the [Menu] button.

2 Use the , , , buttons to select General. Then press the OK button.

3 Use the , , , buttons to select Set ID. Then press the OK button.

4 Select a Set ID to assign. Then press the OK button. The Set ID can be a value from 1 to 10.

5 Press the EXIT button to exit (pressing the [Menu] button hides the OSD).

Communication Parameters

 Baud rate: 9600 bps (UART)

 Data length: 8 bits

 Parity bit: None

 Stop bit: 1 bit

 Communication code: ASCII code

 Crossed (reverse) cable used.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 55 56

No comments

LG 27HJ710S-W User Manual Page 44