Lg RU-42PZ61/71 User Manual Page 41

  • Download
  • Add to my manuals
  • Print
  • Page
    / 52
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 40
External Control Device Setup
26. ISM Method (Command2:p)
G To avoid having a fixed image remain on screen.
Transmission
[j][p][ ][SetlD][ ][Data][Cr]
Data 0: Normal
1: White wash
Acknowledgement
2: Orbiter
3: Inversion
[p][ ][Set ID][ ][OK][Data][x]
27. Low Power (Command2:q)
G To control the low power function on/off.
Transmission
[j][q][ ][SetlD][ ][Data][Cr]
Data 0: Low power off
1: Low power on
Acknowledgement
[q][ ][Set ID][ ][OK][Data][x]
28. Orbiter Time Setting (Command2:r)
G To adjust orbiter operation time term.
Transmission
[j][r][ ][SetlD][ ][Data][Cr]
Data Min: 1 ~ Max: FE
Acknowledgement
[r][ ][Set ID][ ][OK][Data][x]
29. Orbiter Pixel Setting (Command2:s)
G To adjust pixel number in orbiter function.
Transmission
[j][s][ ][SetlD][ ][Data][Cr]
Data Min: 1 ~ Max: 9
Acknowledgement
[s][ ][Set ID][ ][OK][Data][x]
30. Picture Size Setting for Double Window
mode (Command2:t)
G To adjust main window size in Double Window mode.
Transmission
[j][t][ ][SetlD][ ][Data][Cr]
Data Min: 0 ~ Max: 1E (or 20)
• Refer to ‘Real data mappingT. See page 38.
Acknowledgement
][Set ID][ ][OK][Data][x]
31. Auto Configure (Command2:u)
G To adjust picture position and minimize image shaking
automatically. It works only in RGB (PC) mode.
Transmission
[j][u][ ][SetlD][ ][Data][Cr]
Data 1 : To set
Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
32. Tune command (Command: m a)
G Tune channel to following physical number
Transmission
[m][a][ ][SetlD][ ][DataO][ ][Data1][ ][Data2][ ][Data3][Cr]
Data 0: Air: 02 ~ 45, Cable: 01, OE ~ 7D
1: 0
2: 0
3: High ^ Main Channel: 0, Sub Channel: 1
Low ^ Air: 0, CATV: 1
Acknowledgement
[a][ ][SetlD][ ][OK][DataO][ ][Data1][ ][Data2][ ][Data3][x]
33. Channel Add/Del (Command: m b)
G To add and delete the channels
Transmission
[m][b][ ][Set ID][ ][Data][Cr]
Data 0: Channel Memory
1: Channel Erase
Acknowledgement
[b][ ][Set ID][ ][OK][Data][x]
34. Key (Command: m c)
G To send IR remote key code
Transmission
[m][c][ ][Set ID][ ][Data][ ][Cr]
Data Key code: Refer to page 43.
Acknowledgement
[c][ ][Set ID][ ][OK][Data][x]
Owner’s Manual 41
Page view 40
1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 51 52

Comments to this Manuals

No comments