
OWNER’S MANUALCLEANING ROBOTVR6170LVMBefore using, please carefully read the Safety Precautions pages to allow for safe operation of the product. Afte
8BUTTON FUNCTIONS – Roboking 2.0• Use the TIMER button to start cleaning after a set amount of time has elapsed.• The timer can be set from 1 to maxim
9BUTTON FUNCTIONS – REMOTE CONTROL• The Roboking 2.0’s power supply cannot be turned on with the remote control.• If the main unit is turned off, the
10DISPLAY STATUS INFORMATION• Once the cleaning mode is selected, it will be kept in memory even when the power is turned off.• To cancel the timer
11BEFORE YOU START• Do not use this device in a room where a child is left alone. The child could be injured.• Remove fragile or unnecessary objects
12OVERVIEW1Install the home station. (Page 13)Insert the power cord plug into an outlet and locate the station against a wall. If power is not sup
13HOW TO INSTALL THE HOME STATION1. Position the home station against a wall, to prevent sliding during docking, on hard level flooring. Remove o
14HOW TO TURN THE Roboking 2.0 POWER SUPPLY ON & OFFTo turn the power supply on, turn the Roboking 2.0 upside down on a smooth/soft surface and ch
15HOW TO START AND STOP CLEANINGAfter the Roboking 2.0 is turned on, press the START/STOP button to begin cleaning. A melody will sound and cleaning w
16HOW TO CHARGE THE BATTERYThe Roboking 2.0 returns to the home station at the end of a cleaning cycle or when its battery is running low.※ When cle
17HOW TO CHARGE THE BATTERYCheck 1:If the battery is not charging even when the Roboking 2.0 is attached to the home station, check the following item
FEATURESImages of the ceiling and floor are obtained from the sensors of the upper and lower cameras, and through this, the location of Roboking 2.0 wi
18CLEANING MODESWith zigzag cleaning, the total of the cleaning area will be cleaned with the repetition of zigzag traveling.If rapid cleaning is desi
19AUXILIARY CLEANING MODESThis method of cleaning involves manually moving the Roboking 2.0 by pressing the directional (arrow) buttons on the remote
20TIMER CLEANING1. By pressing the TIMER button on the remote control or the Roboking 2.0, a cleaning time can be scheduled.2. Adjust the time as mu
21MOP CLEANING (OPTION)1. Attach the ultra microfiber mop to the Velcro of the mop plate as shown in the figure. ※ To prevent the Roboking 2.0 from
22LOCATION SEARCH FUNCTIONWhen the user removes any abnormal condition of Roboking 2.0 or moves the location arbitrarily, the location search function
23CLEANING THE DUST BIN1. Open the dust bin cover by pressing the PUSH button on the Roboking 2.0.2. Grab the handle of the dust bin and pull it upw
24CLEANING THE DUST BIN FILTERThe dust bin filters are comprised of the HEPA filter and the sponge filter.Clean the HEPA filter and the sponge filter accor
25CLEANING THE BRUSHInsert the fixing hook on the opposite side of the brush (marked with a rounded rectangle) by matching it to the separation groove
26CLEANING THE SENSOR/CHARGING TERMINALReceiving sensor of remote controller Camera sensor• Do not clean the Roboking 2.0 by directly spraying it with
27CLEANING THE SIDE BRUSHForeign objects/materials such as hair can easily adhere to the side brush. Remove such materials at least once a week.If exc
CONTENTSSafety precautionsIncluded with productParts descriptionButton functionsDisplay status informationBefore you startOverview1BEFORE THE USE2METH
28CLEANING THE ULTRA MICROFIBER MOP (OPTION)1. Separate the ultra microfiber mop from the mop plate.2. Carefully clean it with water.3. Use the mop on
29TROUBLESHOOTINGIf the unit becomes stuck or suspended and the wheels do not allow the unit to move, the voice, “Please check the wheels”, will be a
30TROUBLESHOOTINGWhen an abnormality is detected with the dust bin, the voice, “Please check the dust bin”, is announced.• Is the dust bin tted corr
31TROUBLESHOOTINGProper assembly assures that the rotation of the brush becomes smooth.※ For a more detailed description of this process, refer to the
32BEFORE YOU CALL FOR SERVICEConfirm before reporting the failure of Roboking 2.0.Problem Solutions (Reference page)The Roboking 2.0 will not activate.
33PRODUCT SPECIFICATIONSItem/Model LG Roboking 2.0 VR6170LVMExternal DimensionsΦ 360 mm × 90 mmWeight 3.2 kgPower Consumption 18 WBattery (Fully Charg
34REFERENCE ITEMSOpen source software noticeTo obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this p
MEMO
2SAFETY PRECAUTIONSThe purpose of the safety precautions described below is for the user to use the product safely and correctly to prevent any unexpe
Made in Korea
3SAFETY PRECAUTIONSDo not touch the power plug with wet hands. Doing so can cause electric shock.Do not spray or suck in inflammable materials, surfact
4SAFETY PRECAUTIONSCheck the following items before use:• Empty the dust bin after if fills up.• Remove any cables or long strings from the floor.• Re
5INCLUDED WITH PRODUCT Figures can be different from actual objects.Dust bin filter (spare)Brush for cleaning filter Mop plate Ultra microfiber mop (2
6PARTS DESCRIPTION - Roboking 2.0 Figures can be different from actual objects.Plan viewManipulation buttonDust bin cover buttonDust bin coverStatus
7PART DESCRIPTION – HOME STATION / DUST BIN Figures can be different from actual objects.Home stationDust binRemote controller holderCharging termina
Comments to this Manuals