LG 42WT30MS-B User Manual download pdf (Page 51)

ENG

ENGLISH

CUSTOMIZING SETTINGS

Picture ID Settings

Picture ID

is used to change the settings of a

specic display using a single IR receiver for

multi-vision. Communication is possible between

a monitor with an IR receiver and other monitors

using RS232C cables. Each monitor is identied

by a

Set ID

. If you assign the

Picture ID

using

the remote control, only displays with the same

Picture ID

and

Set ID

can be controlled remotely.

2 Press the ON (Red) button on the remote con-

trol to assign the PICTURE ID.

1 Assign the Set ID to the installed monitors as

shown below:

3 If you press the left/right buttons or the red ON

button for PICTURE ID repeatedly, the Picture

ID toggles between OFF and 1 to 4. Assign the

Set ID as you like.

A set with a different

Set ID

than the

Picture

cannot be controlled by IR signals.

Please refer to the

Installation Manual

for

more information on the assigning

Total Set

NOTE

Picture ID

◄ Off ►

2X2 Multi-Vision (Total Set ID: 4)

Set IDs are assigned as shown in the picture.

AUDIO

(RGB/DVI)

REMOTE

CONTROL IN

RS-232C OUT

RS-232C IN

RS-232C OUT

RS-232C IN

RS-232C OUT

RS-232C IN

IR Receiver

RS232C cable

Picture ID

Off

Picture ID

is set to 2, the upper right

monitor, that has a

Set ID

of 2, can be

controlled by IR signals.

If you press the green

OFF

button for

PICTURE ID

, the

Picture ID

s for all monitors

are turned off. If you then press any button

on the remote control, all monitors can be

controlled by IR signals regardless of

Set ID

The

Picture ID

function may not work while

MY MEDIA

is operating.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 94 95

Comments to this Manuals

No comments

LG 42WT30MS-B User Manual Page 51

Comments to this Manuals

Related products and manuals for Public displays LG 42WT30MS-B