LG 52LG7000 User Manual download pdf (Page 30)

EXTERNAL EQIPMENT SETUP

EXTERNAL EQUIPMENT SETUP

NOTE

To enjoy vivid picture and sound, connect a PC to

the TV.

Avoid keeping a fixed image on the set’s screen

for prolonged periods of time. The fixed image

may become permanently imprinted on the

screen; use a screen saver when possible.

Connect the PC to the RGB (PC) or HDMI IN (or

HDMI/DVI IN) port of the TV; change the resolu-

tion.

There may be interference relating to resolution,

vertical pattern, contrast or brightness in PC

mode. Change the PC mode to another resolu-

tion or change the refresh rate to another rate or

adjust the brightness and contrast on the menu

until the picture is clear. If the refresh rate of the

PC graphic card can not be changed, change the

PC graphic card or consult the manufacturer of

the PC graphic card.

The synchronization input waveform for

Horizontal and Vertical frequencies are separate.

Connect the signal cable from the monitor out-

put port of the PC to the RGB (PC) port of the

TV or the signal cable from the HDMI output

port of the PC to the HDMI IN (or HDMI/DVI

IN) port on the TV.

Connect the audio cable from the PC to the

Audio input on the TV. (Audio cables are not

included with the TV).

If using a sound card, adjust PC sound as

required.

This TV uses a VESA Plug and Play Solution. The

TV provides EDID data to the PC system with a

DDC protocol. The PC adjusts automatically

when using this TV.

DDC protocol is preset for RGB (Analog RGB),

HDMI (Digital RGB) mode.

If required, adjust the settings for Plug and Play

functionality

If the graphic card on the PC does not output

analogue and digital RGB simultaneously, connect

only one of either RGB or HDMI IN (or

HDMI/DVI IN) to display the PC output on the

TV.

If graphic card on the PC does output analog and

digital RGB simultaneously, set the TV to either

RGB or HDMI; (the other mode is set to Plug and

Play automatically by the TV.)

DOS mode may not work depending on the video

card if you use a HDMI to DVI cable.

If you use too long an RGB-PC cable, there may

be interference on the screen. We recommend

using under 5m of cable. This provides the best

picture quality.

If connected HDMI(1080p, over 12bit) to HDMI

jack on the side, screen may abnormal.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 147 148

Comments to this Manuals

No comments

LG 52LG7000 User Manual Page 30

Comments to this Manuals

Related products and manuals for Plasma TVs LG 52LG7000