LG MS2588ZRF User Manual download pdf (Page 9)

Any kitchen cabinet in contact with the oven must be heat resistant upto 90 °C,

and any other cabinetry close to the oven up to at least 70 °C.

* If fitting the microwave oven above a conventional a mylar sheet must be

fitted above the wall oven to protect the microwave.

* Fit the oven into the kitchen cabinet slowly, and without force, until the front

frame of the oven seals against the front opening of the cabinet.

* Ensure the appliance is stable and not leaning.

For Ventilation

For correct ventilation, the ventilation opening of 45mm at min. should be

required between the back wall and the floor of the installation cabinet, the

ventilation gap of 5mm is required between the oven top rim and the cabinet

door, between the oven left side rim and the cabinet door, between the oven

lower rim and the cabinet door (or conventional oven top rim), these

openings must not be closed by any way. So ensure that the sides are not

touching the front edges of the housing.

Fix the oven in position with the screws provided.

The fixing points are located on the top and bottom corners of the oven

(see diagram).

* It is important to ensure that the installation

of this product conforms to the instructions

in this operation manual and the

conventional oven manufacturer’s

installation instructions.

min. 5

no back

wall

Mylar

Sheet

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 36 37

No comments

LG MS2588ZRF User Manual Page 9