LG 50PM4700 User Manual download pdf (Page 31)

31

ENGENGLISH

MAGIC REMOTE CONTROL FUNCTIONS

How to use Magic Remote

Control

1 If the pointer disappears, move

the remote control slightly

to left or right. Then, it will

automatically appear on the

screen.



»

If the pointer has not been

used for a certain period of

time, it will disappear.

2 You can move the pointer by

aiming the Pointer Receiver of

the remote control at your TV

then move it left, right, up or

down.



»

If the pointer does not work

properly, leave the remote

control for 10 seconds then

use it again.

Precautions to Take when

Using the Magic Remote

Control



Use the remote control within the maximum

communication distance (10 m). Using the

remote control beyond this distance, or

with an object obstructing it, may cause a

communication failure.



A communication failure may occur due to

nearby devices. Electrical devices such as

a microwave oven or wireless LAN product

may cause interference, as these use the

same bandwidth (2.4 GHz) as the Magic

Remote Control.



The Magic Remote Control may be damaged

or may malfunction if it is dropped or receives

a heavy impact.



Take care not to bump into nearby furniture

or other people when using the Magic

Remote Control.



Manufacturer and installer cannot provide

service related to human safety as the

applicable wireless device has possibility of

electric wave interference.



It is recommended that an Access Point (AP)

be located more than 1 m away from the

TV. If the AP is installed closer than 1 m, the

Magic Remote Control may not perform as

expected due to frequency interference.

Registering Magic Remote

Control

It is necessary to ‘pair’ (register) the magic remote

control to your TV before it will work.

How to register the Magic Remote Control

BACK

HOME

P

MY APPS

1 To register automatically,

turn the TV on and press the

Wheel(OK) button. When

registration is completed, the

completion message appears

on the screen.

2 If registration fails, turn the TV

off and back on, then press

the Wheel(OK) button to

complete registration.

How to re-register the Magic Remote Control

BACK

HOME

1 Press and hold the BACK

and HOME buttons together

for 5 seconds to reset, then

register it by following “How

to register the Magic Remote

Control” above.

2 To re-register the Magic

Remote Control, press and

hold the BACK button for 5

seconds toward the TV. When

registration is completed, the

completion message appears

on the screen.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 52 53

Comments to this Manuals

No comments