LG L1952S-SF User Manual download pdf (Page 9)

Connecting the Display

Using the Computer

1. Place the monitor in a convenient, well-ventilated location near your computer.

2. Connect the signal cable. When attached, tighten the thumbscrews to secure the

connection.

3. Connect the power cord into a proper power outlet that is easily accessible and close to

the display.

Wall-outlet type

PC-outlet type

MAC

Power Cord

Signal Cable

Varies according to model.

Mac adapter

For Apple Macintosh use, a separate plug adapter is needed to change

the 15 pin high density (3 row) D-sub VGA connector on the supplied

cable to a 15 pin 2 row connector.

4. Press button on the side switch panel to turn the power on.

When monitor power is turned on, the 'Self Image Setting

Function' is executed automatically.

(Only Analog Mode)

NOTE

‘ Self Image Setting Function’? This function provides the user with optimal display settings.When the user

connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual

input signals. If you want to adjust the monitor while in use, or wish to manually run this function once again, push

the ‘AUTO/SET’ button on the side panel of the monitor. Otherwise, you may execute the ‘ Factory reset’ option on

the OSD adjustment menu. However, be aware that this option initializes all the menu items except ‘Language’.

NOTE

This is a simplified representation

of the rear view.

This rear view represents a

general model; your display may

differ from the view as shown.

1 2 3 4 5 6 7 8 9 10 ... 26

No comments

LG L1952S-SF User Manual Page 9