OLED55C8*OLED65C8*OLED77C8*www.lg.com*MFL70359802*(1801-REV01)12 14 16 20 X 9(M4 X L12) AA1 35247 9118610Read Safety and Reference.Français.Consultare
8ENGLISHConnectionsConnect various external devices to the TV and switch input modes to select an external device. For more information of external de
ENGLISH9External DevicesAvailable external devices are: Blu-ray player, HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gamin
10ENGLISHUsing Magic Remote Control(Depending on model)The descriptions in this manual are based on the buttons on the remote control. Please read thi
ENGLISH11 Returns to the previous level. * Clears on-screen displays and returns to last input viewing. Shows programme guide.1 2 Streaming Service
12ENGLISHTroubleshootingCannot control the TV with the remote control. • Check the remote control sensor on the product and try again. • Check if ther
ENGLISH13SpecicationsBroadcasting SpecificationsDigital TV Analogue TVTelevision systemDVB-TDVB-T21DVB-CDVB-S/S21PAL/SECAM, B/G, D/K, ISECAM LChannel
14ENGLISHOpen Source Software Notice InformationTo obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in t
ENGLISH15Important Information for Preventing Image RetentionOLED is a self-emissive technology, which brings many signicant benets to image quality
16ENGLISH
OWNER’S MANUALEXTERNAL CONTROL DEVICE SETUPwww.lg.comPlease read this manual carefully before operating the set and retain it for future reference.
ANTENNA /CABLE INSatellite INHDMI INPCMCIA CARD SLOTAUDIO OUT/H/P OUTLANOPTICAL DIGITAL AUDIO OUTSatellite INMainSatellite INSubVIDEOAV INVIDEO L/MONO
2ENGENGLISH2KEY CODESKEY CODES• This feature is not available for all models.Code (Hexa)Function NoteCode (Hexa)Function Note00 CH +, PR + R/C Button
3ENGENGLISH3EXTERNAL CONTROL DEVICE SETUPEXTERNAL CONTROL DEVICE SETUP• Image shown may differ from your TV.Connect the USB to Serial converter/RS-23
4ENGENGLISH4EXTERNAL CONTROL DEVICE SETUPPhone jack Type• You need to purchase the phone-jack to RS-232 cable required for the connection between the
5ENGENGLISH5EXTERNAL CONTROL DEVICE SETUPCommunication Parameters• Baud rate : 9600 bps (UART)• Data length : 8 bits• Parity : None• Stop bit : 1
6ENGENGLISH6EXTERNAL CONTROL DEVICE SETUPTransmission / Receiving ProtocolTransmission[Command1][Command2][ ][Set ID][ ][Data][Cr][Command 1] : Firs
7ENGENGLISH7EXTERNAL CONTROL DEVICE SETUP* Commands may work differently depending on model and signal.01. Power (Command: k a) ► To control Power *On
8ENGENGLISH8EXTERNAL CONTROL DEVICE SETUPData Min : 00 to Max : 64Ack [i][ ][Set ID][ ][OK/NG][Data][x]09. Tint (Command: k j) ► To adjust the screen
9ENGENGLISH9EXTERNAL CONTROL DEVICE SETUP1 0 05th Band1 0 1 0 020(decimal)Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x]* It depends on model, and
10ENGENGLISH10EXTERNAL CONTROL DEVICE SETUPNumber - 22 : Antenna TV (DTV) – Don’t Use Physical Channel Number - 26 : Cable TV (CADTV) - Don’t Use
11ENGENGLISH11EXTERNAL CONTROL DEVICE SETUP24. Input select (Command: x b) (Main Picture Input) ► To select input source for main picture.Transmission
Please read this manual carefully before operating your set and retain it for future reference.www.lg.comSafety and ReferenceCopyright © 2018 LG Elect
12ENGENGLISH12EXTERNAL CONTROL DEVICE SETUP27. Auto Configure (Command: j u) (Depending on model) ► To adjust picture position and minimize image sha
2ENGLISHWarning! Safety InstructionsCAUTIONRISK OF ELECTRIC SHOCKDO NOT OPENCAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BA
ENGLISH3 • Grounding (Except for devices which are not grounded.) - TV with a three-prong grounded AC plug must be connected to a three-prong grounded
4ENGLISHPreparing • If the TV is turned on for the rst time after it was shipped from the factory, initialization of the TV may take a few minutes. •
ENGLISH5Wall Mounting Bracket(Depending on model)Make sure to use screws and wall mount bracket that meet the VESA standard. Standard dimensions for t
6ENGLISH • When transporting a large TV, there should be at least 2 people. • When transporting the TV by hand, hold the TV as shown in the following
ENGLISH7Securing TV to the Wall(Depending on model)1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. • If there ar
Comments to this Manuals