LG 43LH511T User Manual download pdf (Page 18)

ENGLISH

You may nd dierent brightness and color of the panel depending on

your viewing position(left/right/top/down).

This phenomenon occurs due to the characteristic of the panel. It is not

related with the product performance, and it is not malfunction.

Displaying a still image for a prolonged period of time may cause image

sticking. Avoid displaying a xed image on the TV screen for a long

period of time.

Generated sound

“Cracking” noise: A cracking noise that occurs when watching or turning

o the TV is generated by plastic thermal contraction due to tempera-

ture and humidity. This noise is common for products where thermal

deformation is required. Electrical circuit humming/panel buzzing:

A low level noise is generated from a high-speed switching circuit,

which supplies a large amount of current to operate a product. It varies

depending on the product.

This generated sound does not aect the performance and reliability

of the product.

Do not use high voltage electrical goods near the TV (e.g. electric

mosquito-swatter). This may result in product malfunction.

Preparing

NOTE

• Image shown may dier from your TV.

• Your TV’s OSD (On Screen Display) may dier slightly from that

shown in this manual.

• The available menus and options may dier from the input source

or product model that you are using.

• New features may be added to this TV in the future.

• The items supplied with your product may vary depending on the

model.

• Product specications or contents of this manual may be changed

without prior notice due to upgrade of product functions.

• For an optimal connection, HDMI cables and USB devices should

have bezels less than 10 mm thick and 18 mm width. Use an

extension cable that supports USB 2.0 if the USB cable or USB

memory stick does not t into your TV’s USB port.

10 mm

18 mm

• Use a certied cable with the HDMI logo attached.

• If you do not use a certied HDMI cable, the screen may not display

or a connection error may occur. (Recommended HDMI Cable Types)

- High-Speed HDMI

cable (3 m or less)

- High-Speed HDMI

cable with Ethernet (3 m or less)

• How to use the ferrite core (Depending on model)

- Use the ferrite core to reduce the electromagnetic interference in

the power cord. Wind the power cord on the ferrite core once.

[Wall side]

[TV side]

10 cm (+ / -2 cm)

• Antenna isolator installation guide (Depending on model)

- Use this to install TV in a place where there is a voltage

dierence between TV Set and GND of antenna signal.

» If there is a voltage dierence between TV Set and GND of

antenna signal, the antenna contact might be heated and

excessive heat might cause an accident.

- You can improve the safety when watching TV by eciently

removing power voltage from TV antenna. It is recommended

to mount the isolator to the wall. If it cannot be mounted to

the wall, mount it on the TV. Avoid disconnecting the antenna

Isolator after installation.

- Before starting, be sure that the TV antenna is connected.

ANTENNA/

CABLE IN

Cable /

Antenna

Wall

Isolator

1. Connect to TV.

2. Connect to Set-Top box.

- Connect one end of the isolator to cable/antenna jack and the

other to TV set or set-top box.

“Equipment connected to the protective earthing of the building

installation through the mains connection or through other

equipment with a connection to protective earthing - and to

a cable distribution system using coaxial cable, may in some

circumstances create a re hazard. Connection to a cable

distribution system has therefore to be provided through a

device providing electrical isolation below a certain frequency

range (galvanic isolator, see EN 60728-11)”

- When applying the RF Isolator, a slight loss of signal sensitivity

can occur.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 45 46

Comments to this Manuals

No comments

LG 43LH511T User Manual Page 18

Comments to this Manuals

Related products and manuals for LCD TVs LG 43LH511T