28
ENG
ENGLISH
ENTERTAINMENT
ENTERTAINMENT
(Depending on model)
Image shown may differ from your TV.
Connecting USB storage devices
Connect USB storage devices (external HDD, USB
memory) to the TV and use multimedia features (See
“Browsing les” on p.29).
Connect a USB ash memory or USB memory card
reader to the TV as shown on the following illustration.
USB IN
To disconnect a USB storage device,
make sure to end the connection properly to prevent
damages to the TV or files.
1 Press Q.MENU to access the quick menus.
2 Press the Navigation buttons to scroll to Eject and
press OK.
3 Disconnect the USB storage device only when the
message says that it is safe to remove.
CAUTION
Do not turn the TV off or remove a USB storage
device while the USB storage device is connected
to the TV, as this could result in loss of files or
damage to the USB storage device.
Back up your files saved on a USB storage
device frequently, as you may lose or damage
the files and this may be not covered by the
manufacturer’s warranty.
Tips for using USB storage devices
Only a USB storage device is recognizable.
If the USB storage device is connected through a
USB hub, the device is not recognizable.
A USB storage device using an automatic recognition
programme may not be recognized.
A USB storage device which uses its own driver may
not be recognized.
The recognition speed of a USB storage device may
depend on each device.
Please do not turn off the TV or unplug the USB
device when the connected USB storage device is
working. When such device is suddenly separated
or unplugged, the stored les or the USB storage
device may be damaged.
Please do not connect the USB storage device which
was articially manoeuvred on the PC. The device
may cause the product to malfunction or fail to be
played. Never forget to use only a USB storage
device which has normal music les, image les or
movie les.
Please use only a USB storage device which was
formatted as a FAT16, FAT32, NTFS le system.
Please connect a USB storage device with the cable
offered by the device maker.
Some USB storage devices may not be supported or
operated smoothly.
Be sure to back up important les since data stored
in a USB memory device may be damaged. We will
not be responsible for any data loss.
If a USB memory device is connected to a USB multi-
card reader, its volume data may not be detected.
If the USB memory device does not work properly,
disconnect and reconnect it.
How fast a USB memory device is detected differs
from device to device.
The recommended capacity is 1 TB or less for a
USB external hard disk and 32 GB or less for USB
memory.
Any device with more than the recommended
capacity may not work properly.
USB storage devices below USB 2.0 are supported
as well. But they may not work properly in the movie
list.
Maximum of 999 folders or les can be recognized
under one folder.
If there are a lot of folders or les all within one folder,
the device may not be able to access these properly.
For external USB HDDs, it is recommended that you
use devices with a rated voltage of less than 5 V and
a rated current of less than 500 MA.
Comments to this Manuals