LG KA80610F User Manual

Ceramic Glass HOBInstallation and Operating InstructionsKA80610P/No. :3828W5A8448To avoid the risk of accidents or damage to the HOB,it is essential t

10Description of the ApplianceCooking zones and controlCooking zone 1200W 15cmWarming zone 270W 14X20cmCooking zone 2200W (Dual) 22cmTouch-ControlChil

11The Key Features of Your Appliance• Cooking zones: The appliance is fitted with ceramic glass.• Touch Control: Your appliance is operated using

12Operating InstructionsBefore using for the first timeInitial CleaningWipe the ceramic glass surface with a damp cloth and ceramiccooktop glass clean

Warning: Your hob has a residual heat indicator for each hot-plate. This indicator will warn you that this area hasbeen used and is still giving off e

1. To set quickly when the power level “0” is displayed.Touch the or key. The first time is pressed, the heat level is set to

15Warming zone selectionFor setting and adjusting the warm level (1 to 5) for warming, touchthe key.1. The first time key is pressed, the warm le

16Operating InstructionsDual SelectionSet the desired power level of the left front burner.To switch on other heater of the left front(Dual) one, touc

17Child LockWith this key the control can be locked, as a safety precaution forchildren. Touch this key one more time, Child Lock will be rele

18Operating InstructionsTimerA cooking duration can be set with the integrated timer for allcooking zones. When the end of the cooking duration is rea

193. Using the or key set or adjust the required period of time(eg. 30 minutes).After a few seconds the timer will start automatically and

2Dear CustomerPlease read these operating instructions carefully.Above all, please observe the “safety” section on the first fewpages.Please retain th

20Uses, Tables and TipsChart for Setting the Cooking ZonesHeat setting 97-96-74-53-42-31-20Heating UpHeavyBrowningDeep fatfryingBakingFryingBoilSteami

21Chart for Setting the Warming ZoneThe warming zone is used for fermentation, keeping hot, cookedfood at serving temperature and melting according to

22If an element is in constant use for a long time without the settingbeing changed, the automatic time limiter is activated.Then, power level is set

23Light Soiling1. Wipe the ceramic glass surface with a damp cloth and a littlecooktop cleaner.2. Then rub dry with a clean cloth. Remnants of cleaner

24Problem Soils1. Remove sugar, melted plastic, aluminium foil or other meltablematerials with a glass scraper immediately and while still hot.Importa

25Installation InstructionsTechnical DataImportant! The new appliance may only be installed andconnected by a registered specialist.Please observe the

26Installation InstructionsRegulations, Standards, DirectivesThis appliance meets the following standards:• EN 60335-1 and EN 60335-2-6 relating to th

27Safety Instructions for the Installer• A device must be provided in the electrical installation whichallows the appliance to be disconnected from th

28Installation InstructionsElectrical ConnectionBefore connecting, check that the nominal voltage of the appliance,that is the voltage stated on the r

29Warning: Pay attention (conformity) to phase and neutralallocation of house connection and appliance(connection scheme), otherwise components can be

3Contents Safety ... 4-7Suitable Kitchenware ...

30Installation InstructionsAssembly<Fig. 2>Remove thebracing from thefurniture for hobairflow.<Fig. 3>Follow Fig.3 forminimumrequired surf

31<Fig. 4>Cabinet cutout and mounting clip locations.228228228228CLCL

32Installation InstructionsThe board is to be installed underneath the hob.<Fig. 5>Hob into cutout as shown in Fig. 5.Caution: It is very import

33<Fig. 7>To remove the hob, it must be pressed out from below.

34Troubleshooting Malfunctions often have simple explanations. Please read thefollowing instructions before calling the after-sales service:Problem de

35Problem descriptionIndicator shows Possible cause or Remedies• Check that the household fuses for theappliance are OK. Check if there has beena powe

36Troubleshooting Problem description Indicator shows Flashing Burner not glowingredRepairsRepairs may only be carried out by service technicians.Poss

37ServicePackaging and old appliancesYour new appliance was protected by suitable packaging while itwas on its way to you. All materials used for this

38Memo

39

4SafetyThe safety aspects of this appliance comply with acceptedtechnical standards and IEC Standards. However, as themanufacturer we also believe it

Max. 7.9kWP/no.:3828W5A8448220V-240V 1AC/2NAC 50/60HzModel : KA80610Made In KoreaFOR WARRANTY SERVICE PLEASE CONTACT THE RETAILER FROM WHOMYOU PUR

5Child SafetyThis appliance is not intended for use by young children or infirmpersons unless they have been adequately supervised by aresponsible per

6SafetySafety When Cleaning• Always switch off the appliance before cleaning.• For safety reasons do not clean the appliance with a steam jet orhigh p

7Disposal of old appliancesWarning: Before disposing of old appliances please make theminoperable so that they cannot be the source of danger.To do th

8Suitable KitchenwarePots and pansThe better the pot, the better the cooking results.• You can recognize good pots and pans by their bases. The basesh

9Tips on saving energyYou will save valuable energy by observing the following points:• Always position pots and pans before you switch on the cooking