1
10 1. Start MacOS. 2. Remove the cover from your USB Drive and plug it into an USB port of your MAC. If it is the first time to use USB Drive, M
11 Through SecureCell Utility, you can make USB Drive security-enabled, bootable disk-enabled. Security feature is currently compatible with only
12 Figure 1 Figure 2 Figure 3 - Click “O.K” button to start formatting. After finishing the procedure,
13 7. [Change Device Name] - If you want to change Device Name, click the “Change Device Name” button and follow the instructions as following fi
14 Figure 6 8. [Set Password] - The password mode is enabled after making dual partition, click the Set Password on Password Mode. (F
15 Figure 9 NOTE: You can’t access USB Drive if you lost your password. Because you can’t recover the saved data, please keep attention for your
16 Figure 10 Figure 11 9. [To divide partition] You can divide a USB Drive to two partition for yo
17 Figure 12 Figure 13 Figure 14 Figure 15
18 Figure 16 9. [OPTIONS] - [Show tray icon while device plugged] : Sets flag for displaying icon, which shows existence of USB Drive. - [Ch
19 ell Q. I do not have any driver CD-ROM. What can I do? A. Go to the www.lge.com website and download and install the driver installation prog
2 Before Using USB Drive...03 What is USB Drive? ...
20 that has less than 2% bad sector. Sometimes, bad sectors can be generated during using USB Drive. To remove bad sectors, download SecureCell Util
21 Q. Can I set a password for the files to be saved in USB Drive? A. Every word processing program supports a password function for the file to pre
22 The appearance and specifications can change for enhancements of the product without prior notice. Model USB Dri
3 Welcome to USB Drive. This user guide is designed to help you to use USB Drive correctly and safely. Please read this information carefully befor
4 Caution - Do not disconnect the USB Drive from the computer’s USB port while transferring (reading or writing) data. This will probably result in
5 USB Drive™ is a removable, portable, flash memory based data storage device that works via your computer’s Universal Serial Bus (USB) interface.
6 1. Start Windows ME, Windows 2000 or Windows XP. 2. Remove the cover from your USB Drive and plug it into a USB port on your computer. If it is
7 3. Select to remove hardware. 4. When your computer indicates it is acceptable to remove hardware, then unplug the USB Drive from the USB port.
8 5. You must restart your computer. 6. After taking off the cap of the USB Drive and insert it to USB port of your PC, then it is recognized by t
9 Removing USB Drive in Microsoft Windows 98/98SE 1. Close all files currently opened from USB Drive. 2. Unplug USB Drive from the USB
Comments to this Manuals