
28
FILTER
It is recommended that
you replace
the filter when the
water filter indicator
light
turns on or
your
water
dispenser
or ice maker
performance
decreases
noticeably.
After
changing
the water filter
cartridge,
reset the water
filter status
display
and indicator
light by pressing
and
holding
the button for 3 seconds.
1. Remove the old
cartridge.
Placea container under
the hole of filter holder.
NOTE: When filter is
being
removed,
the water drains
through
the hole.
Rotate the knob of the
cartridge
counter
clockwise.
Pull out the filter
cartridge.
2.
Replace
with a new
cartridge.
Take the new
cartridge
out of its
packaging
and
remove
protective
coverfrom the
o-rings.
With
cartridge
knob in the vertical
position, push
the
new filter
cartridge
into the cover until it
stops.
If
you
can't turn the filter from side to
side,
it isn't
fully
inserted. Push it in
firmly
and twist it into
place.
You
will hear the
snap
when it clicks into
place.
Using
its
handle,
twist the
cartridge
clockwise about 1/4
turn. You will hear the
snap
when it clicks into
place.
3.
Flushing
the Water
System
After
Replacing
Filter
Dispense
water
through
the water
dispenser
for 3
minutes to
purge
the
system.
NOTE: To
purchase replacement
water filter
cartridges,
visit
your
local
appliance
dealer or
part
distributor. You
can also visit our website:
www.lgappliances.com
or call
1-877-714-7481.The
replacement
water filter
cartridge's
part
number is 5231JA2006B.
Comments to this Manuals