LG GR-V2523SL User Manual Page 9

  • Download
  • Add to my manuals
  • Print
  • Page
    / 20
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 8
9
THIS REFRIGERATOR IS MANUFACTURED WITH GREAT CARE AND UTILIZES THE
LATEST IN TECHNOLOGY.
WE ARE CONFIDENT THAT YOU WILL BE FULLY SATISFIED WITH ITS PERFORMANCE
AND RELIABILITY.
BEFORE USING YOUR REFRIGERATOR, PLEASE READ THIS BOOKLET CAREFULLY.
IT PROVIDES EXACT INSTRUCTIONS FOR INSTALLATION, OPERATION,
AND MAINTENANCE, AND ALSO SUPPLIES SOME USEFUL HINTS.
SELECT A GOOD LOCATION
NEXT
1. Wipe off all dust accumulated during shipping
1. Place your refrigerator where it is easy to use.
and clean your refrigerator thoroughly.
2. Avoid placing the refrigerator near heat sources,
direct sunlight or moisture.
3.
To ensure proper air circulation around the
fridge-freezer, please maintain sufficient
space on both the sides as well as top and
maintain at least 2 inches (5 cm) from the
rear wall.
4. To avoid vibrations, the refrigerator must
be level.
Assemble refrigerator Leg to Hinge Lower pin by
rotating it counter clock wise (Dispenser model).
If necessary, adjust the leveling screw(s) to
compensate for unevenness of the floor.
To close the doors easily, the front should be
slightly higher than the rear.
Leveling screw(s) can be turned easily by
tipping the cabinet slightly.
Turn the leveling screw(s) clockwise to raise the
refrigerator, counterclockwise to lower it.
2. Install accessories such as the ice cube box,
evaporating tray cover, etc., in their proper
places. They are packed together to prevent
possible damage during shipping.
3. Connect the power supply cord (or plug) to the
outlet. Don't double up with other appliances
on the same outlet.
4. Prior to use, let the refrigerator run for 2-3
hours.
Check the flow of cold air in the freezer com-
partment to ensure proper cooling has taken
place.
Your refrigerator is now ready for use.
INSTALLATION
Page view 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Comments to this Manuals

No comments