
3. Replacing Refrigerator Handle
•
•
Place the handle (2) on the door by adjusting handle
Turn handle upside down (5)
footprints to fit mounting fastners and tighten the set
screws (1) with the 3/32 ” Allen wrench.
REFRIGERATOR INSTALLATION
4. Installing Refrigerator Door
Install the middle hinge (1) on the opposite side with the
screws (2), and the screw (3).
Install the door (4) so that it fits onto the middle hinge
pin (5).
Install the top hinge (6) with screws.
Reinstall top hinge cover (7).
•
•
•
•
12
•
•
Install the plug buttons (4) on the left side.
Install the handle mounting fasteners (3)
on the right side.
Carefully loosen the plug buttons with your fingers(4).
The buttons can be unscrewed with your fingers,
rotating the pieces counter clockwise, and then
the piece will be loose and fall. The buttons were
installed without some pressure, for this reason the
action can be done with your forefinger or thumb
finger or with both.
Comments to this Manuals