LG DX0002TM User Manual download pdf (Page 24)

FLOW CHECK (DUCT CONDITION TEST)

Correct Venting

Restricted or Blocked Airflow

Avoid long runs or runs with multiple elbows

or bends.

Check for blockages and lint buildup.

Make sure the ductwork is not crushed

or restricted.

I N S TA L L AT I O N I N S T RU C T I O N S

INSTALLATION INSTRUCTIONS

Your dryer features FlowSense

™

, an innovative sensing system that automatically detects

blockages and restrictions in dryer ductwork. Keeping ductwork clean of lint buildup and

free of restrictions allows clothes to dry faster and reduces energy use.

NOTE: When the dryer is ﬁ rst installed, this test should be performed to alert you to any

existing problems with the exhaust duct in your home. However, since the test performed

during normal operation provides more accurate information on the condition of the

exhaust duct than does the installation test, the number of bars displayed during the two

tests may not be the same.

To activate the ﬂ ow check (Duct condition test) :

NOTE: Dryer heating test must be performed before proceeding. Then perform the duct

condition test below:

If no bars are shown in

the display, the ductwork

is free from blockages

or restrictions.

If all bars are lit, the

dryer ductwork has a

blockage that needs to

be removed immediately.

IMPORTANT: Do NOT interrupt the test cycle!

THE DUCTWORK IS FREE

FROM BLOCKAGES OR

RESTRICTIONS.

COMPLETED FLOW CHECK

THE DUCTWORK HAS

A BLOCKAGE THAT NEEDS

TO BE REMOVED

IMMEDIATELY.

NEED FLOW CHECK

CUSTOM PGM

*PGM SAVE

OPTION

*LANGUAGE

FLOW CHECK

THIS TEST CHECKS THE CONDITION

OF THE EXHAUST DUCT AT THE TIME

OF INSTALLATION

HIGH

0:02

EST. TIME

REMAINING

FLOW CHECK

0:02

EST. TIME

REMAINING

HIGH

After pressing the POWER ON/OFF, turn the cycle

knob.

When pressing the OPTION button, OFF will be

displayed.

When pressing CUSTOM PGM, OFF will be

change to ON.

ON I

FLOW CHECK

After 3 seconds, or

by pressing the EXIT

button, the display

will show the FLOW

CHECK start screen.

Press START/PAUSE. The dryer

will run for approximately 2

minutes to test

for blockages

or restrictions

to air ﬂ ow in the

ductwork.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 143 144

Comments to this Manuals

No comments

LG DX0002TM User Manual Page 24

Comments to this Manuals

Related products and manuals for Electric laundry dryers LG DX0002TM