LG DLEX8500V User Manual download pdf (Page 21)

ENGLISH

INSTALLATION INSTRUCTIONS

Venting requirement

Deduct 6 ft. (1.8 m) for each additional elbow. It is not recommended

to use more than four 90° elbows.

ROUTING AND CONNECTING DUCTWORK

Follow the guidelines below to maximize drying performance and

reduce lint buildup and condensation in the ductwork.

Ductwork and fittings are NOT included and must be purchased

separately.

• Use 4-inch (10.2 cm) diameter rigid or semirigid metal ductwork.

• The exhaust duct run should be as short as possible.

• Use as few elbow joints as possible.

• The male end of each section of exhaust duct must point away from

the dryer.

• Use duct tape on all duct joints.

• Insulate ductwork that runs through unheated areas in order to

reduce condensation and lint buildup on duct surfaces.

• Failure to exhaust the dryer correctly will void the dryer’s warranty.

Ductwork













65 ft. (19.8 m)

55 ft. (16.8 m)

47 ft. (14.3 m)

36 ft. (11.0 m)

28 ft. (8.5 m)

55 ft. (16.8 m)

47 ft. (14.3 m )

41 ft. (12.5 m)

30 ft. (9.1 m)

22 ft. (6.7 m)

(10.2 cm)

Recommended

Use Only for Short

Run Installations

(10.2 cm)

/2"

(6.35 cm)





NOTE

MFL67731015_en_170830.indd 21 2017.8.30 3:58:6 PM

1 ... 20 21 22 ... 108

Comments to this Manuals

No comments

LG DLEX8500V User Manual Page 21

Comments to this Manuals

Related products and manuals for Electric laundry dryers LG DLEX8500V