LG RH277H User Manual download pdf (Page 18)

General Settings (Continued)

Clock Set

1. Select [Clock set] option then press B.

2. Enter the necessary information for date and time.

b / B (left/right): Moves the cursor to the previous

or next column.

v / V (up/down): Changes the setting at the

current cursor position.

3. Press ENTER to confirm your setting.

TV Aspect

Selects the aspect ratio of the connected TV (4:3

standard or wide).

 [4:3 Letter Box] Select this when connecting to a 4:3

screen TV. Displays a wide picture with bands on

the upper and lower portions of the screen.

 [4:3 Pan Scan] Select this when connecting to a 4:3

screen TV. Automatically displays a wide picture on

the entire screen and cuts off the portions that do

not fit.

 [16:9 Wide] Select this when connecting to a wide-

screen TV or TV with a wide mode function.

AV2 Connection

You can connect a decoder or other device to the

AV2 DECODER jack on the back.

 [Decoder] Select [Decoder] if you connect the

recorder’s AV2 DECODER jack to a PAY-TV or

Canal Plus decoder.

 [Others] Select [Others] if you connect the

recorder’s AV2 DECODER jack to a VCR or similar

recording device.

Video Output Format

Select the Video output format option according ro the

connection type of this unit

 [YPBP

R] When your TV is connected with the

COMPONENT OUTPUT jack on this unit.

 [RGB] When your TV is connected with the

SCART(RGB signal) jack on this unit.

Power Save Mode

You can set up the unit into an economic power save

mode. Nothing is displayed in the display window

when the unit is turned off.

 [OFF] Power Save Mode is not active.

 [ON] Power Save Mode is active.

Notes:

 The encoded television signals (CANAL+ or

PREMIERE) are not decoded in the Power Save

Mode.

 The Power Save Mode is not available in the

standby mode for the timer recording and when

power off of the unit after receiving the encoded

television signals (CANAL+ or PREMIERE).

Initialization

You can reset the recorder to its original factory

settings and initialize the HDD.

 [Factory Set] If you need to, you can reset the

recorder to all its factory settings. Some options

cannot be reset. (Rating, Password, and Area

Code)

 [HDD format] Initializes the HDD (Hard Disk Drive):

everything recorded on the HDD will be erased.

1. Select [Initialize] option then press B.

2. Press v / V to select the desired option then press

ENTER.

The confirm message will appear.

3. Use b / B to select [Yes] or [No] then press

ENTER.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 58 59

Comments to this Manuals

No comments

LG RH277H User Manual Page 18

Comments to this Manuals

Related products and manuals for DVD players LG RH277H