LG RC689D User Manual download pdf (Page 17)

Connecting 17

Connecting

1. Connect one of the Recorder’s DIGITAL AUDIO

OUTPUT jacks (OPTICAL or COAXIAL) to the

corresponding in jack on your amplier. Use an

optional digital (Optical or Coaxial) audio cable.

2. You will need to activate the Recorder ’s digital

output. (See [Audio Settings] on page 27).

If the audio format of the digital output

does not match the capabilities of your

receiver, the receiver will produce a strong,

distorted sound or no sound at all.

Six Channel Digital Surround Sound via

digital connection can only be obtained

if your receiver is equipped with a Digital

Multi-channel decoder.

To see the audio format of the current DVD

in the on-screen display, press AUDIO.

This Recorder does not perform internal (2

channel) decoding of a DTS sound track. To

enjoy DTS multi channel surround, you must

connect this Recorder to a DTS compatible

receiver via one of this Recorder’s digital

audio outputs.

While viewing a digital channel, the 2

channel stereo audio is only output through

the audio output jacks.

A digital multi-channel connection provides

the best sound quality. For this you need

a multi-channel Audio/Video receiver that

supports one or more of the audio formats

supported by your Recorder (MPEG 2, Dolby

Digital and DTS). Check the receiver manual

and the logos on the front of the receiver.

Note

Connecting to an Ampliﬁer via

2 Channel Audio Output

Connect the Left and Right 2CH AUDIO OUT jacks

on the player to the audio left and right in jacks

on your amplier, receiver, or stereo system using

audio cables.

Audio cable

AUDIO INPUT

Rear of this unit

Amplier/Receiver

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 71 72

Comments to this Manuals

No comments

LG RC689D User Manual Page 17

Comments to this Manuals

Related products and manuals for DVD players LG RC689D