System Setting 19
System Setting
3
Display Mode
The Display Mode setting works only when the TV
Aspect mode is set to 4:3.
[Letterbox]
Displays a wide picture with bands on the
upper and lower portions of the screen.
[Panscan]
Automatically displays the wide picture on the
entire screen and cuts o the portions that do
not t. (If the disc/le is not compatible with
Pan Scan, the picture is displayed at Letterbox
ratio.)
Resolution
Sets the output resolution of the Component and
HDMI video signal. Refer to “Resolution Setting” for
details about the resolution (page 15).
[Auto]
If the HDMI OUT TO TV jack is connected to
TVs providing display information (EDID),
automatically selects the resolution best suited
to the connected TV. If the COMPONENT
VIDEO OUT is only connected, this changes the
resolution to 480i (or 576i) as default resolution.
[480i (or 576i)]
Outputs 480 (or (576) lines of interlaced video.
[480p (or 576p)]
Outputs 480 (or 576) lines of progressive video.
[720p]
Outputs 720 lines of progressive video.
[1080i]
Outputs 1 080 lines of interlaced video.
[1080p]
Outputs 1 080 lines of progressive video.
Audio
DRC (Dynamic Range Control)
Make the sound clear when the volume is turned
down (Dolby Digital only). Set to [On] for this eect.
Vocal
Select [On] to mix karaoke channels into normal
stereo.
This function is eective for multi-channel karaoke
DVDs only.
HD AV Sync
Sometimes Digital TV encounters a delay between
picture and sound. If this happens you can
compensate by setting a delay on the sound so
that it eectively ‘waits’ for the picture to arrive:
this is called HD AV Sync. Use
WS
(on the remote
control) to scroll up and down through the delay
amount, which you can set at anything between
0 and 300 ms.
DM2630K-FH_DRUSLLG_ENG.indd 19 2013-04-18 2:23:03
Comments to this Manuals