LG DKS-9500H User Manual download pdf (Page 9)

Adjusting the audio settings

Dolby Digital / DTS / MPEG

Bitstream: Select “Bitstream” if you connect the DVD Player’s DIGITAL

OUT jack to an amplifier or other equipment with a Dolby Digital, DTS or

MPEG decoder.

PCM : Select when connected to a two-channel digital stereo amplifier.

DVDs encoded in Dolby Digital or MPEG will be automatically downmixed to

two-channel PCM audio.

- For DTS decoder, audio signals are outputted only when connected

according to Digital connection(through coaxial and optical jacks).

DRC (Dynamic Range Control) – Make the sound clear when the volume is

turned down (Dolby Digital only). Set to [On] for this effect.

Vocal – Select [On] to mix karaoke channels into normal stereo. This function is

effective for multi-channel karaoke DVDs only.

HD AV Sync - Sometimes Digital TV encounters a delay between picture and

sound. If this happens you can compensate by setting a delay on the sound so

that it effectively ‘waits’ for the picture to arrive: this is called HD AV Sync. Use

UU uu

(on the remote control) to scroll up and down through the delay amount,

which you can set at anything between 0 and 300m sec.

Adjusting the lock settings

To access the lock options, you must enter the 4-digit password. If you have not

yet entered a password you are prompted to do so.

1 Enter a 4-digit password then press ENTER.

2 Enter it again then press ENTER to verify. If you make a mistake while enter-

ing number, press CLEAR then correct it.

If you forget your password you can reset it.

1 Remove the disc in the unit.

2 Press SETUP to display the Setup menu. Input ‘210499’ and press ENTER.

Rating – Select a rating level. The lower the level, the stricter the rating. Select

[Unlock] to deactivate the rating. For rated discs, make sure to press ENTER

after entering the password to enjoy it.

Password – Sets or changes the password for lock settings.

[New]: Enter a new 4-digit password using the numerical buttons then press

ENTER. Enter the password again to confirm.

[Change]: Enter the new password twice after entering the current password.

Area code – Select a code for a geographic area as the playback rating level.

This determines which area’s standards are used to rate DVDs controlled by the

parental lock. See the Area Codes on page 17.

5.1 Speaker Setup

ON REMOTE

1 Open the settings menu: SETUP

2 Select the audio icon:

UU uu

3 Select right to enter the audio menu, then

select 5.1 Speaker Setup:

ii UU uu

ENTER

4 Select the speaker you want to adjust:

II ii

5 Select a option and change

the settings:

UU uu II ii

6 Set the output level (volume) of a speaker:

from -5dB to +5dB.

II ii

7 If you connect speakers to your unit,

setting the Distance lets the speakers to

know how far the sound has to travel to

reach your set listening point. This allows

the sound from each speaker to reach the

listener at the same time.

II ii

8 Test the signals of each speaker:

Adjust the volume to your taste

according to these signals.

II ii

9 Save your settings and exit the Setup

menu: SETUP

KD400 DRUSLL ENG 8372 3/29/13 6:20 PM Page 9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Comments to this Manuals

No comments

LG DKS-9500H User Manual Page 9

Comments to this Manuals

Related products and manuals for DVD players LG DKS-9500H