
44
EN
Problem Possible Cause Solutions
Food soil remains on
dishes.
Improper cycle selection.
• Select correct cycle based on soil
level and type of dishware being
washed.
Water temperature is too
low.
• Check water supply connection or
water heater setting.
Dishwashing detergent
was not used.
• Use recommended detergent.
Low inlet water pressure.
• Water pressure should be between
20 and 80 psi.
Water jet holes on spray
arms blocked.
• Clean the spray arms.
Improper loading of
dishes.
• Make sure dishes do not block spray
arm rotation or interfere with
detergent dispenser.
Filters are clogged. • Clean filters.
Too much Unremoved
food debris on dishes.
• Large particles of food residues
should be removed from the dishes
before staring wash.
Noise
Some level of noise is
normal during operation.
• Detergent cover opening.
• Drain pump at the beginning of drain
cycle.
The appliance is not level. • Adjust leveling feet.
Nozzle arm knocking
against dishes.
• Reposition the dishes.
Water pressure is too
high.
• Adjust water pressure.
Dishes don’t dry.
Rinse agent dispenser
empty.
• Check and refill the rinse agent
dispenser if empty. For better drying
result, slightly open the door after
operation.
Tablets used may not
have a built in rinse aid.
This will reduce the drying
performance.
• Change to a tablet that includes a
rinse agent (contact the tablet
manufacturer if unsure). Alternatively,
you can use a liquid rinse agent in
the dispenser if the tablets don’t
have a rinse agent built in.
A cycle without the Extra
Dry option was selected.
• Select a cycle that defaults to the
Extra Dry option.
Comments to this Manuals