LG LAC-M5600 User Manual download pdf (Page 7)

Installation

Before installing, make sure that the ignition switch is set to

OFF and remove the terminal of the car battery to avoid

short-circuiting.

1 Remove the existing receiver unit.

2 Make the necessary connections.

3 Install the installation sleeve.

4 Install the unit into the installation sleeve.

Removing the existing receiver unit.

Please remove any installation sleeves already in place for the

receiver unit in the dashboard, it must be removed.

1 Remove the rear support from the unit.

2 Remove the front panel and trim ring from the unit.

3 Insert the lever A into the hole on one side of the unit.

Perform the same operation on the other side and pull the

unit out from the mounting sleeve.

Basic Installation

1 Slide the unit into the ISO-DIN frame.

2 Install the screws removed from the old unit.

3 Slide the unit and frame into the dash opening.

4 Install the dash panel or adapter plate.

5 Install the trim ring into unit.

6 Install the faceplate by fitting the right edge into position

then pushing the left edge closed.

ISO-DIN Installation

Bend the claws

according to

the thickness

of the

dashboard

Front panel

1 2 3 4 5 6 7 8 9 10 11 12 ... 17 18

No comments

LG LAC-M5600 User Manual Page 7