Lg 42PB4D User Manual download pdf (Page 106)

APPENDIX

104

APPENDIX

PROGRAMMING THE REMOTE CONTROL

Programming a code into a remote mode

To find out whether your remote control can operate each device without programming, turn on the device

(such as a VCR) and press the corresponding mode button on the remote.

After that, press the

PPOOWWEERR

button. If the device is turned off and it responds properly the remote control

need not be programmed. If not, the remote should be programmed to operate the device. The program-

ming procedures are explained below.

Press the

MMEENNUU

and

MMUUTTEE

button continuously at the same time for two seconds; the currently selected

device button is illuminated.

If you don't press any button for 20 seconds, the light on the mode button will be turned off. In that case,

you have to repeat from step 2.

Enter the appropriate code from the code table on the following pages. When pressing the button, the light

blinks at a time. If the device turned off, the programming is successful.

Press the

MMEENNUU

button to store the code. After blinking twice, this code is stored.

Test the remote control functions to see if the device responds properly. If not, steps 2-5.

The remote is a multi-brand or a universal remote. It can be programmed to operate most remote-control-

lable devices of other manufacturers.

Note that the remote may not control all models of other brands.

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 131 132

No comments

Lg 42PB4D User Manual Page 106