Lg 37LD325H User Manual download pdf (Page 156)

206-4163

Reference: b-LAN Setup & Overview

The control device at the head end, for example, an LG FMA-LG101, can control multiple TVs. When the TV is

first installed, it must be turned ON in order for the head end to be able to communicate with the b-LAN. At this

point, if it is desired for the b-LAN to always be powered, including while the TV is in Standby, set Installer Menu

item 118 POWER SAVINGS to 001.

If the embedded b-LAN will not be used, enable maximum power savings in both Standby and TV Power On

Mode by setting Installer Menu item 118 POWER SAVINGS to 007.

POWER

SAVINGS

TV Power On State

TV Standby State

b-LAN Power

001 On On

003 (default) Off On

007 Off Off

The b-LAN module is internal to the TV. It allows the hotel/institution head end equipment to communicate, via

the institution’s RF distribution system, with the TV for configuration and control.

Note: MPI cards with b-LAN technology—LMT7Z5, LMT7Z7, LMT7Z9—are NOT supported on TVs in which the

b-LAN module is embedded.

Power to the b-LAN module is controlled by Installer Menu item 118 POWER SAVINGS. The default value is

003—the b-LAN module is only powered when the TV is turned ON. See chart below.

1 2 ... 151 152 153 154 155 156 157 158 159 160 161 ... 211 212

No comments

Lg 37LD325H User Manual Page 156