41
Problem Possible Causes Solution
The water bucket level
does not change during
Humid Purify mode.
Water bucket lters are not
assembled properly.
• Properly assemble the top and side water
bucket lters in the water bucket.
The water bucket lters are dirty
or clogged.
• Clean the water bucket lters. See page
31.
The Watering Engine™'s holes
are clogged.
• Clean the Watering Engine™. See page
37.
It is raining or it is cold indoors.
• The humidier uses less water so the
amount of water in the bucket decreases
slowly.
The air quality
window is not clear or
condensation is not
forming during Humid
Purify mode.
The holes in the Watering
Engine™ are clogged.
• Clean the Watering Engine™. See page
37.
The air quality window is dirty.
• Clean the inside and outside of the window
on the water bucket using the ultra-ne
cloth provided. See page 31.
Humidity level does not
rise.
Room is too large.
• Use in a smaller or more enclosed area.
Water bucket is empty.
• Fill the water bucket.
Dirt has built up on the water
bucket lters.
• Clean the water bucket lters. See page
31.
Displayed humidity
level does not agree
with another device.
Dierent measuring methods, or
air circulation.
• The product measures and displays
the relative humidity according to the
temperature. The humidity measured by
a hygrometer or by two products, even
in the same space, may dier because
of installation height, air circulation, or
temperature dierence.
Comments to this Manuals