LG WTG1032WF User Manual download pdf (Page 15)

15

EN

Connecting Hose to Appliance

Attach the hot water line to the hot water inlet

on the back of the washing machine. Attach the

cold water line to the cold water inlet on the

back of the washing machine.

NOTE

• After completing connection, if water leaks

from the hose, repeat the same steps. Use

the most conventional type of tap for the water

supply. In case the tap is square or too big,

remove the guide plate before inserting the

tap into the adaptor.

Installing the Drain Hose

Before connecting the drain hose, check your

drain hose model and choose the correct

instruction.

Pump Model (Australia and other

countries)

• The drain hose should not be placed higher

than 120 cm above the floor. Water in the

washing machine may not drain or may drain

slowly.

• Securing the drain hose correctly will protect

the floor from damage in the event of water

leakage.

• If the drain hose is too long, do not force it

back into the washing machine. This will

cause abnormal noise.

• When installing the drain hose to a sink,

secure it tightly with string.

0.9 - 1.2 m

0.9 - 1.2 m

Laundry tub

Hose

retainer

Tie strap

NOTE

• The discharge height should be approximately

0.9 - 1.2 m from the floor.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 43 44

Comments to this Manuals

No comments