LG WFT7300 User Manual download pdf (Page 32)

leaning and Maintenance

Care and Maintenance

When water supply into the tub is not clean or the filter is clogged with particles (such as sand),

clean the filter in the inlet valve occasionally.

(The figure of power cord and water tap may vary according to the country)

To Clean the Filter in the Inlet Valve

Cold water washing

To Clean the Lint Filter

Close the tap before turning off the power.

Select both HOT/COLD and then press

the[START/PAUSE ] button to remove

water from the machine completely.

• If you always use COLD water, we recommend that a WARM or HOT wash be used at a regular

intervals e.g. every 5th wash should be at least a WARM one.

When you have finished

• Turn off taps to prevent the chance of flooding should a hose burst.

• Always unplug the power cord after use.

After removing the water supply

hose pull out the filter. Then use

a brush to clean the filter.

Turn off the power before

pulling out the cord.

Replace the filter after cleaning it.

1 2

NOTE

• If the lint filter is torn or damaged, purchase a new one from LG service center.

NOTE

•

Before cleaning the filter, the impurities in the water supply hose should be removed.

NOTE

• Check if water leaks after reassembling. (The Rubber ring is in the cap)

To Clean the Pump casing (for pump model)

Place a towel on the

floor under the drain

pump cap. Excess

water may flow out.

Remove any foreign

objects and fluff inside

pump casing and from

the filter.

Replace the cap. Insert the filter

along the guide ribs inside the

pump casing. Filter must face the

guide ribs inside pump casing and

securely turn the cap clockwise.

2 3

Turn the cap

counter-

clockwise and

pull it out.

Filter

Cap

Guide rib

Filter

4 5 61

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 38 39 40

Comments to this Manuals

No comments

LG WFT7300 User Manual Page 32

Comments to this Manuals

Related products and manuals for Washing machines LG WFT7300