LG WF-N6866DN User Manual download pdf (Page 26)

Cleaning the filter in the inlet valve

Cleaning the lint filter

Before cleaning the filter in the inlet valve, completely remove the water remaining in the water hose.

When the water supply is bad, check substances like stone or sand in the filter.

If the filter is clogged with dirt, water cannot flow into the washer. Clean the filter regularly.

1 3

Turn off the water tap and put on the power

switch.

Select cold & hot water and press

START/PAUSE button. Let the washer operate

for 5 seconds

Disconnect water hose, and remove filter from

the inlet valve by hand or with tools. Remove

dirt with a tooth brush and clean in water.

Switch off the washer and disconnect the power

cord.

Then insert it back into the water inlet.

When the lint filter is worn out, etc., contact a LG Service Center for a new one.

1 2 3

Press and then pull forward

the lint filter from the washing

tub to the arrow direction.

Turn inside out and wash it to

remove dirt.

Insert it back into same

place and push until click

sound heard.

Press & Pull

Push

leaning and Maintenance

Care and Maintenance

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32

No comments

LG WF-N6866DN User Manual Page 26