LG WD1216HTE User Manual download pdf (Page 13)

Leveling the Appliance

If the oor is uneven, turn the adjustable feet as required

(Do not insert pieces of wood etc. under the feet). Make

sure that all four feet are stable and resting on the oor

and then check that the appliance is perfectly level (Use

a spirit level).

•

Once the appliance is level, tighten the lock nuts up

towards the base of the appliance. All lock nuts must

be tightened.

Raise

Lock nut

Lower

Tighten all 4

lock nuts securely

Diagonal Check

•

When pushing down the edges of the top plate

diagonally, the appliance should not move up and

down at all (Check both directions). If the appliance

rocks when pushing the machine top plate diagonally,

adjust the feet again.

NOTE

•

Timber or suspended type ooring may contribute

to excessive vibration and unbalance errors and

malfunctions.

Connecting Supply Hose

•

Water supply pressure must be between 0.1 MPa and

0.8 MPa (1.0‒8.0 kgf/cm

•

Do not strip or crossthread when connecting supply

hose to the valve.

•

If the water supply pressure is more than 0.8 MPa, a

decompression device should be installed.

•

Periodically check the condition of the hose and

replace the hose if necessary.

Checking the Rubber Seal on the Supply

Hose

Two rubber seals are supplied with the water supply

hoses.

They are used for preventing water leaks. Make sure

the connection to taps is sufciently tight. Do not over

tighten the hoses with any mechanical device.

Hose connector

Rubber seal

Hose connector

Rubber seal

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 47 48

Comments to this Manuals

No comments

LG WD1216HTE User Manual Page 13

Comments to this Manuals

Related products and manuals for Washing machines LG WD1216HTE