LG WD-12270RDK User Manual

Washing MachineOWNER'S MANUALWD(M)-1227(0~9)RD(K)Thank you for buying aLG Fully Automatic Washing machine.Please read your owner's manual ca

10nstallationIInstallation of drain hose • The drain hose should not be placed higherthan 100 cm above the floor. Water in thewasher does not drain

11nstallationILevel adjustmentConcrete floors1. Adjusting the washing machine level properly prevents excessivenoise and vibration.Install the appl

12are before washingC1. Care LabelsLook for a care label on your clothes. This will tell you about the fabric content of your garment andhow it should

13dding detergentA• Main wash only ➔• Pre Wash + Main Wash ➔• Do not exceed the maximum fill line.Close the dispenser drawer slowly.Overfilling can ca

14dding detergentA• The detergent should be used according to theinstruction of the detergent manufacture.• If too much detergent is used, too many su

15unctionFRecommended courses according to the laundry typeCottonCotton-EcoSyntheticDelicateWool/SilkHandWashQuick 30DuvetLaundry type is thesame in

16ow to use washerH• Press the Power( ) button to start.• Press the Start/Pause( ) button.• Initial condition- Wash : Main wash- Rinse : 3 t

17ow to use washerHProgram• 9 programs are available according to thelaundry type.Power• Press the Power( ) button to turn poweron and off.• To c

18ow to use washerHStart/Pause Option• This Start/Pause button is used to startwash cycle or pause the wash cycle.• If temporary stop of wash cycle i

19ow to use washerHChild lock Rinse• By pressing the Rinsebutton, the Rinse type canbe selected.• If you choose to lock the buttons on thecontrol asse

roduct FeaturePontentsC2Warnings...3Specification...

20ow to use washerHSpinTime DelayPreparing washing before starting “Time Delay”- Turn on the water tap.- Load laundry and close the door.- Place the d

21ow to use washerHWater Temperature• By pressing the Temp.button, the watertemperature can beselected.- Cold- 30˚C / 40˚C / 60˚C / 95˚C• Water temper

22ow to use washerH• When drying cycle is completed, “ ”[Cool Down] is displayed on the Multidisplay.• The Cool Down is setting automatically

23ow to use washerHDisplay• When Child lock is selected, the “ ”lamp is on.• After the end of dry, “ ” is displayed.• When time d

24aintenanceM The water inlet filter- " "error message will blink on the control panel when water does not enter thedetergent drawer.- If

25aintenanceM The drain pump filter❋ The drain filter collects threads and small objects left in the laundry.Check regularly that the filter is clean

26aintenanceMDispenser drawer❋ After a while detergents and fabric softeners leave a deposit in the drawer.• It should be cleaned from time to time w

27aintenanceM The water circulation nozzle• Clean the water circulation nozzle, if clogged.Cleaning your washer1. ExteriorProper care of your washer

roubleshooting guideT28❋ This washing machine is equipped with automatic safety functions which detect anddiagnose faults at an early stage and react

roubleshooting guideT29Washer does not startWasher will not spinDoor does not openWash cycle timedelayedDry problem• Does not dryDo not overload.Check

arningsW3For your safety, the information in this manual must be followed to minimizethe risk of fire or explosion, electric shock, or to prevent prop

roubleshooting guideT30Symptom Possible Cause Solution• Water supply is not adequate in area• Water supply taps are not completelyopen.• Water inlet h

31 Serial NumberHow to read Serial Number.:There is attached a Serial Number label on back side of this product.Example) 805KW✳✳00001 Critical Parts

P/No.: MFL31245147

arningsW4To minimize the risk of fire in a tumble dryer, the following should be observed:• Items that have been spotted or soaked with vegetable or c

5pecificationS Name : Front loading washing machine Power supply : 220V~, 50/60Hz Size : 686mm(W)×767mm(D)×982mm(H) Weight : 91kg Wash capacity

6nstallationI1. To prevent internal damage duringtransport, the special 4 bolts are locked.Before operating the washer, remove the bolts along with th

7nstallationILevel floor :Allowable slope under entire washer is 1˚Power outlet :Must be within 1.5 meters of either side of location ofwasher. Do not

8nstallationI▶Water supply pressure must be between 30kPa and 1000kPa(0.3~10kgf/cm2)▶Don’t strip or crossthread when connecting Inlet hose to the valv

9nstallationI Normal Tap without thread & screw type inlet hose1. Unscrew the fixing screw toattach the tap.2. Push the connector up till therubb