LG S3RERB User Manual Page 42

  • Download
  • Add to my manuals
  • Print
  • Page
    / 48
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 41
Problem Possible Cause Solutions
Control panel won’t
respond
Control panel or button has
dirt on it
Dirt or foreign objects on the control panel
will interfere with the operation of the
buttons. Clean the control panel.
Control panel is locked Disable the Control Lock function. See
Locking the Controls
, page 34.
The cycle won’t start Start/Pause was not touched
after the cycle was set.
Touch Start.
Cycle is producing steam There may be a period of inactivity while
steam is produced.
Control panel is locked Disable the Control Lock function and
touch Start. See
Locking the Controls
,
page 34.
Operation
Problem Possible Cause Solutions
Clothes are wet at the
end of the cycle
Filter is clogged or grill is
upside down
Cleanthelintlter.Insertthegrillwiththe
holes on the right side.
Door gasket is damaged If the rubber door gasket is damaged, it
leaves a gap in the door seal, affecting
performance of the appliance. Call for
service.
Clothes caught in door Make sure all items are completely in
the cabinet and not stuck in the door,
blocking it from closing completely. Run
the cycle again.
Odor is not removed at
end of cycle
Clothes were stored for a
long period of time or are
stained with a strong-smelling
substance
Odorscanbeparticularlydifcultto
remove from clothes that have been
stored for long periods or have strong-
smelling, oily stains. Wash the clothes
rst,beforeusingtheStyler.
Wrinkles are not
removed at end of
cycle
Clothes were stored for a long
period of time
Wrinklesmaybeverydifculttoremove
if set for a long time, especially in cotton
and linen fabrics. Iron clothes that have
been stored for a long period of time
before treating them with the Styler, to
remove wrinkles more effectively.
Clothes have an
unpleasant odor at end
of cycle
Appliance has not been used
for a long time or water tanks
andltershavenotbeen
cleaned
Check for dirt or foreign objects in the
water supply and water drain tanks. Clean
theltersandwatertanks.
Functions are not
operating properly
Detergent or fabric softener
put in water supply tank
Do not use anything but clean water in
the water supply tank.
Performance
42 TROUBLESHOOTING
Page view 41
1 2 ... 37 38 39 40 41 42 43 44 45 46 47 48

Comments to this Manuals

No comments