LG PEXPMB000.ENCXLEU User Manual

www.lg.comPlease read this installation manual completely before installing the product.Installation work must be performed in accordance with the nat

10PRODUCT INSTALLATIONENGLISHConnecting the productThe illustration below shows all the cable connections of the ACS IO. Relay On/Off outputAnalog vol

PRODUCT INSTALLATIONENGLISH11Inputting power sourceUse a power source of 24 V~ conforming to local and national codes.CAUTION• When connecting the pow

12PRODUCT INSTALLATIONENGLISHConnecting the communication LinkConnecting the RS-485 communication linkThe two RS-485 cables must be connected to the B

PRODUCT INSTALLATIONENGLISH13Connecting the ACS IV Controller to the ACS IOA maximum of 16 ACS IO’s can be connected to a single ACS IV Controller.Whe

14PRODUCT INSTALLATIONENGLISHAddress creationWhen one ACS IV Controller(AC Smart IV, ACP IV) is connected to multiple ACS IO, to classifyeach module a

PRODUCT INSTALLATIONENGLISH15Recommended address• Recommended address range : 20~2F• Valid address range : 01~F7Address : 0x20Address : 0x21Address :

16USING THE PRODUCTENGLISHUSING THE PRODUCTThis chapter will describe about the methods of use for the ACS IO.LED statusAO1 AO2 AO3 AO4DO1 DO2 DO3 DI1

USING THE PRODUCTENGLISH17Connecting to an external device (DI port)The dry contact input method is provided for DI ports.Do not apply external power

18USING THE PRODUCTENGLISHConnecting to an external device (DO port)As for the DO port, this is a contact output port.There are a total of 3 DO ports.

USING THE PRODUCTENGLISH19Connecting to an external device (UI port)Each of four UI ports can be configured for use as analog in or digital in only.T

• Do not cool excessively indoors. This may be harmful for your health and may consume moreelectricity.• Block sunlight with blinds or curtains whil

20USING THE PRODUCTENGLISHLED status (UI port)The input status LED will light up under the following circumstances.Types of LED input Minimum valueAna

USING THE PRODUCTENGLISH21Connecting to an external device (AO Port)Each of four analog output ports will provide between 0 and 10 V depending oncentr

22USING THE PRODUCTENGLISHCAUTIONChanges or modifications not expressly approved by the manufacturer responsible forcompliance could void the user’s a

Ver. 1.0.401.MFL67657109(영) 2017. 7. 13. 영영 3:36 Page 300

3IMPORTANT SAFETY INSTRUCTIONSREAD ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.Always comply with the following precautions to avoid dangerous situati

- Failure to do so can cause fire and electric shock.• Do not use a power cord that has been damaged, sabotaged or overly bent.- Failure to do so can

5TABLE OF CONTENTSENGLISHTABLE OF CONTENTS2TIPS FOR SAVING ENERGY3IMPORTANT SAFETYINSTRUCTIONS6PRODUCT FUNCTIONSAND SPECIFICATIONS6The names of each p

6PRODUCT FUNCTIONS AND SPECIFICATIONSENGLISHThe ACS IO is a module that can be connected with the ACS IV Controller (AC Smart IV, and ACPIV) for scala

PRODUCT FUNCTIONS AND SPECIFICATIONS ENGLISH7ComponentsThere are following components in the ACS IO package box. Open the package box of ACS IO and ch

8PRODUCT INSTALLATIONENGLISHPRODUCT INSTALLATIONACS IO installation methodsThere are two methods as seen below for attaching the ACS IO to the wall. A

PRODUCT INSTALLATIONENGLISH9Mounting the ACS IO to a DIN RailThe ACS IO can be installed on a DIN Rail with a width of 35 mm and a height of 7.5 mm.Fo