LG NB4530A User Manual download pdf (Page 22)

Operating22

Operating

AUTO POWER On/Off

Before operating this function, make sure that

you have selected OPTICAL and turn on the AUTO

POWER.

This function automatically turns on/o the unit

when you turn on/o the external device (TV, DVD

Player, Blu-ray Disc Player, etc.) connected to this

unit by the optical cable.

When turning on the unit by this function, Optical

function is selected directly no matter what kind of

function has been selected before turning o it.

This function turns on or o each time you press

AUTO POWER.

Display Operation

AUTO POWER ON

AUTO POWER function is

turned on.

AUTO POWER OFF

AUTO POWER function is

turned o.

This function is intentionally designed to

turn o the unit after 1 minute of inactivity

in OPTICAL mode. Only if the unit has

already received the signal transmitted

through the optical source and there is no

digital audio signal going to the unit, the

unit will turn o after 1 minute of inactivity

with AUTO POWER function is turned on.

Depending on the connected device by the

optical cable, this function may not operate.

If you want to use AUTO POWER, SIMPLINK

must be turned o. It takes for about 30

seconds to switch on or o SIMPLINK.

If SIMPLINK is set to ON, "AUTO POWER OFF"

is just scrolled, even thouth you press AUTO

POWER.

Once AUTO POWER is set, the unit will

start as OPTICAL mode automatically next

time, no matter what kind of function you

selected before.

It is not available to turn on the unit by

AUTO POWER function if you turn o the

unit directly.

AUTO POWER function is not supported on

LG Sound Sync (Wireless) mode.

Note

Auto power down

This unit will be o itself to save electric

consumption in the case main unit is not

connected to external device and is not used for 20

minutes.

So does this unit after six hours since Main unit

has been connected to other device using analog

input.

But the unit can turns on automatically based on

the [AUTO POWER] function you've set.

Sleep timer setting

Press SLEEP repeatedly to select the desired time

period options (in minutes):

LCD OFF(Display window o ) -> DIMMER(The

display window will be darken by half ) -> Sleep

timer value -> Display on

In display window you see “LCD OFF” and the

display window turns o .

To check the remaining time, press SLEEP.

To cancel the sleep function, press SLEEP

repeatedly until “SLEEP 10” appears, and then press

SLEEP once again while “SLEEP 10” is displayed.

You can check the remaining time before the

unit turns o . Press SLEEP the remaining time

appears in the display window.

Note

NB4530A-NE.BDEULLK_ENG_4389.indd 22 2015-03-18  10:32:48

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 31 32

Comments to this Manuals

No comments

LG NB4530A User Manual Page 22

Comments to this Manuals

Related products and manuals for Unknown LG NB4530A