LG MAX225UB User Manual download pdf (Page 5)

Connecting 5

Connecting

2

h

c

/

v

Skip / Search / Seek / Tune

Returns to the previous step.

w

/

s

- List up / down

- Adjusts settings.

- Moves 10 MP3 / WMA  les

backward or forward if there is no

folder or one folder on an USB.

- Moves to the previous or next

folder if there are more than 2 folders

on an USB.

ENTER / LIST

- Con rms the settings.

-

Checks  les or preset stations.

i

DISP

- Press it, you can check the clock

time.

- Press and hold it, you can turn on/

o the display window and the light

of LED buttons.

j

RPT

Repeats playback.

k

INT

Intro scan.

l

Numeric buttons (1 to 6)

Selects a numbered preset station in

TUNER.

Battery Installation

Type 1

Type 2

2

1



Use only one CR2025 (3 V) lithium

battery.



Remove the battery if the remote

control is not used for a long

period of time.



Do not leave the product in a hot

or humid place.



Do not handle the battery with

metallic tools.



Do not store the battery with

metallic materials.

,

Note

Installation

Basic Installation

Before installing, make sure that the

ignition-switch is set to OFF and remove

the terminal of the car battery to avoid

short-circuiting.

Bend the claws

according to

the thickness of

the dashboard.

Control panel

1. Remove the existing receiver unit.

2. Make the necessary connections.

3. Install the installation sleeve.

4. Install the unit into the installation

sleeve.

Removing the existing

receiver unit

If there is already an installation sleeve for

the receiver unit in the dashboard, it must

be removed.

1. Remove the rear support from the unit.

2. Remove the control panel and trim

ring from the unit.

3. Insert the lever into the hole on one

side of the unit. Perform the same

operation on the other side and pull

the unit out from the mounting sleeve.

ISO-DIN Installation

Control panel

1. Slide the unit into the ISO-DIN frame.

2. Fit screws removed from the old unit.

3. Slide the unit and frame into the dash

opening.

4. Install the dash panel or adapter plate.

(According to models, this step may

not be needed.)

5. Install the trim ring to the unit.

6. Install the control panel to the unit.

1 2 3 4 5 6 7 8 9 10 ... 13 14

Comments to this Manuals

No comments