ENGLISH
37
Network Settings
To Set a Signage Name
Remote Control (SETTINGS) Network Signage Name
You can set a name for Signage Monitor that will be used on the network by using the on-screen keyboard.
To Set Your Network
Remote Control (SETTINGS) Network Wired Connection (Ethernet)
• Connecting to a wired network: Connect your monitor to a local area network (LAN) via the LAN port, and
configure the network settings. Only wired network connections are supported. After making a physical
connection, a small number of networks may require the display network settings to be adjusted. For most
networks, the display will automatically make a connection without any adjustments. For detailed information,
contact your Internet provider or consult your router manual.
To Set Your Wireless Network
Remote Control (SETTINGS) Network Wi-Fi Connection
If you have set the display up for a wireless network, you can check and connect to the available wireless Internet
networks.
• Add a Hidden Wireless Network: If you input the name of network directly, you can add a wireless network.
• Connect via WPS PBC: Connects easily when the button of a wireless AP supporting PBC is pressed.
• Connect via WPS PIN: Connects easily when the PIN of the wireless AP that you wish to connect to is entered in to
the AP configuration webpage.
• Advanced Settings: If you input the information of network directly, you can enter a wireless network. If there is
no wireless network available, click Advanced Settings. You can add a network.
CAUTION
• Additional accessories are required to use a wireless network.
Comments to this Manuals