LG 75XS2C-B User Manual download pdf (Page 53)

ENGLISH

Screen Share

y Only applies to certain models.

Allows the screens of devices such as a mobile device or Windows PC to be displayed on the monitor via

wireless connections such as WiDi or Miracast.

Using Screen Share

HOME /

1 Connect according to the instructions provided by the guide that can be accessed through the

CONNECTION GUIDE button in the upper right.

2 Once the connection is established, Screen Share between the user device and the monitor is enabled.

NOTE

Configuring WiDi (Wireless Display)

WiDi, which is short for Wireless Display, is a system that wirelessly transmits video and sound files from a

laptop that supports Intel WiDi to the display.

This is available only in certain input modes (Composite/Component/RGB/HDMI/DP/OPS/DVI-D).

Other than these modes, LG Signage cannot be detected by your PC.

1

Connect your laptop to an AP. (This feature can be used without an AP, but it is recommended that you

connect to it for optimal performance.)

Run the Intel WiDi ( ) program on your laptop.



2

Any nearby LG Signages supporting WiDi are detected. In the list of detected displays, select a Signage to

connect to and then, click Connect.

Enter the 8-digit PIN number (a) displayed on the Signage in the input eld of your laptop (b) and click

Continue.

[Intel Notebook] Connection Request

Enter the PIN below.

PIN********

Cancel

Time remaining: 92 seconds

********

Signage screen Laptop screen

The laptop screen appears in the Signage screen within 10 seconds. The wireless environment may aect

the screen from displaying.

If the connection is poor, the Intel WiDi connection may be lost.

y LG Signage does not need to be registered.

y For more information on how to use Intel WiDi, visit http://intel.com/go/widi.

y This works normally with WiDi 3.5 or later versions.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 120 121

No comments

LG 75XS2C-B User Manual Page 53