LG TD-H802SJW User Manual Page 30

  • Download
  • Add to my manuals
  • Print
  • Page
    / 36
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 29
30
TROUBLESHOOTING
EN
The appliance is equipped with an automatic error-monitoring system to detect and diagnose
problems at an early stage. If the appliance does not function properly or does not function at all,
check the following before you call for service:
Diagnosing Problems
Symptoms Reason Solution
Appliance will not
turn on.
Power cord is not properly
plugged in.
Make sure that the plug is securely
plugged into a grounded outlet
matching the appliance’s rating plate.
House fuse is blown, circuit
breaker has tripped, or power
outage has occurred.
Reset circuit breaker or replace fuse.
Do not increase fuse capacity. If the
problem is a circuit overload, have it
corrected by a qualified electrician.
Appliance does not
heat.
House fuse is blown, circuit
breaker has tripped, or power
outage has occurred.
Reset circuit breaker or replace fuse.
Do not increase fuse capacity. If the
problem is a circuit overload, have it
corrected by a qualified electrician.
Clothes take too long
to dry.
Load is not properly sorted.
Separate heavy items from lightweight
items. Larger and heavier items take
longer to dry. Light items in a load with
heavy items can fool the sensor
because the light items dry faster.
Large load of heavy fabrics.
Heavy fabrics take longer to dry
because they tend to retain more
moisture. To help reduce and maintain
more consistent drying times for large
and heavy fabrics, separate these
items into smaller loads of a consistent
size.
Appliance controls are not
set properly.
Use the appropriate control settings
for the type of load you are drying.
Some loads may require an
adjustment of the dry level setting for
proper drying.
Lint filter needs to be
cleaned.
Remove the lint from the lint filter
before every cycle. With the lint
removed, hold the lint filter up to a
light to see if it is dirty or clogged.
With some loads that produce high
amounts of lint, such as new bath
towels, it may be necessary to pause
the cycle and clean the filter during
the cycle.
Page view 29
1 2 ... 25 26 27 28 29 30 31 32 33 34 35 36

Comments to this Manuals

No comments