LG LW6424-FP User Manual

P/NO : MFL62591949 1010 (V1.0)MODELLW6424 seriesLW6454 seriesPlease read this manual carefully before operating your set and retain it for future re

10 ConnectionsConnectionsPrecautions• Be sure to switch off the unit before installation and connection.• The installation should be made by qualif

Connections 11Connecting NetworkYou can control and monitor the system via network. With the remote control (monitoring), you can change the system c

12 ConnectionsConnecting Power SourceConnect power, using one of the methods listed below:To use the power adapterConnect a DC 12 V power source to t

Connections 13Connecting Alarm DeviceAlarm terminals are used to connect the alarm (relay) devices such as sensors, door switches, etc.ALARM IN / ALA

14 ConnectionsConnecting Microphone and Speaker DeviceOptionally connect an active speaker and/or external microphone with a built-in amplifier.AUDIO

Connections 15Mounting the cameraYou can mount the camera on a ceiling or wall.Surface mountFollow the instructions below to surface mount the camera

16 Connections4. Connect the cables to the cable jacks of the camera body. 5. Assemble the camera and mounting bracket. Connect the unit by followi

Connections 17Wall mount (Optional)Follow the instructions below to install the camera with a wall mount.1. Drill holes in the wall where you want t

18 Connections4. Connect the cables to the camera jack. 5. Attach the camera to the wall mount assembly.

Connections 19Pendant mount (Optional)Follow the instructions below to install the camera with a pendant mount.1. Drill holes on the wall where you

2 CAUTIONRISK OF ELECTRIC SHOCK DO NOT OPENCAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCKDO NOT REMOVE COVER (OR BACK)NO USER-SERVICEABLE PARTS INSI

20 Connections4. Connect the cables to the camera jacks. 5. Attach the camera to the pendant mount assembly.

Operation and settings 21Before using the system• Before using the LG IP device make sure the connections are correct and verify whether proper powe

22 Operation and settings Accessing the LG IP deviceYou can access the LG IP device by following the below steps.1. Copy the IP Utility to your PC1.

Operation and settings 23• If your computer or network is protected by a proxy or firewall, the proxy or firewall settings can prevent the LG Smart

24 Operation and settings Click to save the current image in JPEG format on your computer.1. Click the [Snapshot] button and then the Snapshot windo

Operation and settings 25Conguring the LG IP cameraThe features and options of the LG IP camera are configured through the Configuration menu. Only

26 Operation and settings System settingsVersionDisplays the current version of Firmware, Hardware, Software and Web Client.Date & Time Time zone

Operation and settings 27Server time > Server time: Displays the current date and time of the IP device.• Save: Click this button to confirm the

28 Operation and settings Log & Report Log & Report statusThe System log provides a summary of the status of the IP device. The unit records

Operation and settings 29Audio & Video settingsCamera PreviewYou can preview the camera image on the preview window.General > Contrast: Edit t

3Warning: Do not install this equipment in a confined space such as a bookcase or similar unit.Warning: Wiring methods shall be in accordance with t

30 Operation and settings > Quality: Select the Quality. - VBR: The bit rate may vary depending on the complexity of the video to meet the selec

Operation and settings 31Motion detect PreviewYou can preview the motion detection window on the preview window. General > Sensitivity: Enter the

32 Operation and settings Network settingsBasic General > MAC address: Displays the MAC address.Port & Encryption > Web port: The default H

Operation and settings 33RTP stream RTP (Real-time Transport Protocol) is an internet protocol that allows programs to manage the real-time transmiss

34 Operation and settings TCP/IPIP address status > Automatically set with DHCP: Select this option when a DHCP server is installed on the network

Operation and settings 35DDNSThis free service is very useful when combined with the LG DDNS Server. It allows the user to connect the IP device usin

36 Operation and settings • Add: Click this button to add the IP address.1. Click the [Add] button. 2. Set the IP options. - Alias: Enter the al

Operation and settings 374. Select the authority from the drop down list to provide the access rights to each user and then click the [Save] to con

38 Operation and settings Event settingsEvent scheduleWhen an event (VA/ Motion detect/ Sensor Event) occurs, this unit records the live images and r

Operation and settings 39Event ServerEvent Servers are used to receive the recorded video clip and/or notification messages.FTP server list Image fil

4 IMPORTANT SAFETY INSTRUCTIONS1. Read these instructions.2. Keep these instructions.3. Heed all warnings. 4. Follow all instructions. 5. Do no

40 Operation and settings - Enable SSL: Check when use the SSL (Secure Socket Layer) protocol. SSL protocol is cryptographic protocols that provide

Operation and settings 41OSD Menu SetupThe following table shows the list of menu items and options. You can adapt the camera to your requirements by

42 Operation and settings PRIVACY ONCIRCLEMASK NUMBERAREA1 to AREA2CIR. DISPLAY ON/OFFHEIGHT 1 to 15WIDTH 1 to 15MOVE Y 0 to 100MOVE X 0 to 100RADIUS

Operation and settings 43General Operation1. Click the [OSD control] button on the LG Smart Web Viewer.2. Click button on the OSD control window.

44 Operation and settings Exposure settings You can set the exposure options using the EXPOSURE menu.1. Select [EXPOSURE] option on the [CAMERA SETT

Operation and settings 45AGC (Automatic Gain Control)If the images are too dark, change the maximum [AGC] value to make the images brighter.1. Selec

46 Operation and settings - INDOOR: The color temperature range for the proper white balance is approximately 3 200 K. - OUTDOOR: The color temperat

Operation and settings 473D-DNR setting1. Select [3D-DNR] option.If pictures are not clear due to noise, this option would reduce the noise of pictu

48 Operation and settings - MOVE X: Moves horizontal position of the mask.• CIRCLE : > Use or button to select a mask on the [MASK NUMBER].

Operation and settings 49FOCUS RESETReset the focus point to factory default position.Select the [FOCUS RESET] option on the [BACK FOCUS] menu and th

5Handling of the unitBe careful not to spill water or other liquids on the unit. Be cautious not to get combustible or metallic material inside the

50 Operation and settings • OFF: Turn off the digital effect.SHARPNESSThe degree to which the boundary of the two portions is clearly distinguished.

Operation and settings 51• A(Blank): Insert a space at the cursor position.• / : Moves cursor to left or right.LANGUAGESelect the viewer language

52 ReferenceReferenceTroubleshootingThis section provides useful information to help you to resolve any difficulty you might have with your LG IP dev

Reference 53Accessing camera external to the local network• Firewall Protection: Check for the internet firewall with the system administrator, eith

54 Reference• If we obtain lower frame rate than set we need to check from the system administrator for sufficient bandwidth available or reduce the

Reference 55Open source software noticeThe following GPL executables and LGPL libraries used in this product are subject to the GPL2.0/LGPL2.1 Licens

56 ReferenceThis product includes • dhcp client : Copyright © 2004-2008 by Internet Systems Consortium, Inc. (“ISC”)Copyright © 1995-2003 by Interne

Reference 57All rights reserved.Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated document

58 ReferenceSpecicationsITEM LW6424 LW6454Camera Image Sensor 6.49 mm Progressive Scan CMOS (2 Mega Pixels)Lens F1.4 Varifocal Lens (3 mm to 9 mm)Il

Reference 59Video Analytics Intruder Detection Not support SupportCrossing Line Not support SupportObject Removal Not support SupportObject Counting

6 ContentsContentsIntroduction ... 7Part names and Functions ...

BZ03

Introduction 7The LG Network Camera is designed to use on an Ethernet network and must be assigned an IP address to make it accessible. This manual c

8 IntroductionPart names and Functionsabcdefghijklma Dome Cover Ringb Dome Coverc Fall Prevention rubber bandFixes the rubber band into the dome c

Introduction 9nopqrstn ETHERNET/PoE PortConnects to a PC or a network via a hub with a 10 BASE-T/100 BASE-TX cable attached RJ-45 connector.Note:Po