LG MT08AH.NR0R0 User Manual download pdf (Page 23)

Optional Operation

Installation Manual 23

ENGLISH

Installer Setting -Thermistor

Function Code Thermistor setting

Set Thermistor value by pressing

button. (01: Remote Controller,

02: Indoor, 03: 2TH)

Press button to save.

If moving to room temperature perception

sensor selection menu by pressing

button, it indicates as picture below.

If pressing button long for 3

seconds, it enters into remote

controller setter setup mode.

- If pressing once shortly, it enters

into user setup mode. Please press

more than 3 seconds for sure.

Pressing button will exit settings mode.

❈ After setup, it automatically gets out of

setup mode if there is no button input for

25 seconds.

❈ When exiting without pressing set button,

the manipulated value is not reflected.

❊

The function of 2TH has different operation characteristics according to the product.

Temperature sensor selection Function

01 Remote controller Operation in remote controller temperature sensor

02 Indoor unit Operation in indoor unit temperature sensor

03 2TH

Cooling

Operation of higher temperature by comparing indoor unit's and wired remote

controllerʼs temperature.

(There are products that operate at a lower temperature.)

Heating

Operation of lower temperature by comparing indoor unit's and wired remote

controller's temperature.

This is the function to select the temperature sensor to judge the room temperature.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 29

No comments

LG MT08AH.NR0R0 User Manual Page 23