LG SJ3 User Manual download pdf (Page 11)

2 Connecting

Connecting 11

Connecting

2

Wireless subwoofer

connection

LED indicator of wireless subwoofer

LED Color Status

Green

(Blink)

Attempting to make

connection.

Green The connection is completed.

Red The wireless subwoofer

is in standby mode or the

connection is failed.

Off (No display) The power cord of wireless

subwoofer is disconnected.

Setting up the wireless subwoofer for

the first time

1. Connect the power cord to the subwoofer and

plug the power cord into a power outlet.

2. Turn on the main unit : The sound bar and wireless

subwoofer will be automatically connected.

- Green LED on the rear of wireless subwoofer

turns on.

Manually pairing wireless subwoofer

When your connection is not completed, you can

check red LED on the wireless subwoofer and the

wireless subwoofer does not make sound. To solve

the problem, follow the steps below.

1. Press Pairing button on the rear of the wireless

subwoofer.

- The green LED on the rear of the wireless

subwoofer blinks quickly.

2. Turn on the main unit.

3. Pairing is completed.

- The green LED on the rear of the wireless

subwoofer turns on.

y

It takes a few seconds (and may take longer)

for the main unit and the subwoofer to

communicate with each other and make

sounds.

y

The closer the main unit and the subwoofer,

the better sound quality. It is recommended

to install the main unit and the subwoofer as

close as possible and avoid the cases below.

- There is an obstacle between the main

unit and the subwoofer.

- There is a device using same frequency

with this wireless connection such as

a medical equipment, a microwave or a

wireless LAN device.

- Keep the sound bar and the subwoofer

away from the device (ex. wireless router,

microwave oven, etc.) over 1m to prevent

wireless interference.

!P

,

Note

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 30 31

Comments to this Manuals

No comments