LG LNP2810T User Manual download pdf

Item LNP2810 Series LNP2810T Series

Image Sensor 4.5 mm (1/4 type) CMOS

Lens x28 Zoom, f = 3.5 mm to 98 mm

Resolution (Maximum) Up to 1280 x 720

Day&Night ICR Day & Night (Day / Night / Auto)

Mininum

Illumination

Color 0.8 lx (F1.5, Sens-up off ), 0.16 lx (F1.5, Sens-up x32)

B/W 0.01 lx (F1.5, Sens-up off ), 0.000 1 lx (F1.5, Sens-up x32)

White Balance Auto / ATW / One Push / Manual

Shutter Speed 1/160 to 1/10 000

Iris Auto / Manual

BLC Off / WDR/ BLC

3D-DNR OFF / LOW / MIDDLE / HIGH

AGC OFF / LOW / MIDDLE / HIGH

Privacy Mask 8 Masks

Multi-Streaming Dynamic Profile (Up to 7)

ROI (Region of Interest) Support

Video Out 1xBNC

Frame Rate (Maximum) 30 fps @ 720p

Bit Rate 256 kbps to 10 240 kbps

Auto Tracking No Support Support

Audio Compression G.711, G726

Audio In/Out 1/1

Sample Rate 8 KHz

Audio Bit Rate G.711: 64 kbps, G.726: 24 kbps, 32 kbps

Ethernet 10/100 Ethernet

Protocol IPv4 and IPv6 TCP/IP, UDP, HTTP, HTTPS, RTP, RTSP, DHCP, ICMP

IPv4 FTP, SMTP, NTP, ARP, SNMP v1/v2c/v3, DDNS(LG)

Open Protocol ONVIF 2.2 Profile S, PSIA 1.1

Remote S/W LVi510, Mobile Application (IPhone, Android, iPad)

Pan/Tilt Travel Range Pan:360˚(Endless), Tilt:180˚

Speed Preset 500˚/second

Jog 0.1˚ to 360˚/second

Preset 256

Pattern 4 Patterns (760 command/Pattern)

Auto Pan 2 points to 8 points

Group 10 Groups (8 presets/Group)

Sensor /

Alarm

Sensor 4 Inputs, Photo-Coupler Input

Alarm 2 Relay Outputs, Max Load : DC 30 V 1 A / AC 125 V 0.3 A

IP Module Reset

Terminal

Support

Misc. Mount Accessory Mount Adaptor

Material Aluminum, Plastic sunshield

Rated Power PoE+ / AC 24 V (49 W)

Waterproof IP66, IK10

Fan Always ON

Operation

Temperature

-20˚C to 50˚C

Weight 3.3 Kg

Dimension (Ø x H) 195 mm x 229 mm

Specifications

a BNC connector cover cap

b Video output BNC connector

c Power input terminal

This camera must always be operated AC 24 V.

Certified/Listed Adaptor which comply with LPS.

d AUDIO IN / OUT (Line Level Input / Output)

Input for a mono microphone, or a line-in mono signal.

Connect to an active speaker with a built-in amplifier.

e Data Input Terminal

Input data terminal for alarm signal.

f Data Output Terminal

Output data terminal for alarm signal.

g IP Reset

h ETHERNET Port

Connects to a PC or a network via a hub with a 10 BASE-T/100 BASE-TX cable attached

RJ-45 connector.

i Dome Cover

Accessories

• Software Installation CD

• Cover adaptor

• Mount adaptor

• RJ-45 Cable

• Wrench

• M3 SAMS Screws

Part Names and Functions

Warning

• Do not install this equipment in a

confined space such as a bookcase or

similar unit.

• Wiring methods shall be in accordance

with the National Electric Code, ANSI/

NFPA 70.

• This is a class A product. In a domestic

environment this product may cause

radio interference in which case the

user may be required to take adequate

measures.

• To reduce a risk of fire or electric shock,

do not expose this product to rain or

moisture.

Caution

• This installation should be made by a

qualified service person and should

conform to all local codes.

• To avoid electrical shock, do not open

the cabinet. Refer servicing to qualified

personnel only.

• The apparatus shall not be exposed to

water (dripping or splashing) and no

objects filled with liquids, such as vases,

shall be placed on the apparatus.

To disconnect power from mains, pull

out the mains cord plug. When installing

the product, ensure that the plug is easily

accessible.

LG Electronics hereby declares

that this/these product(s) is/are

in compliance with the essential

requirements and other relevant

provisions of Directive 2004/108/

EC and 2011/65/EU.

Contact office for compliance

of this product:

LG Electronics Inc.

EU Representative, Krijgsman

1,1186 DM Amstelveen, The

Netherlands

Disposal of your old appliance

1. When this crossed-out

wheeled bin symbol is

attached to a product

it means the product is

covered by the European

Directive 2002/96/EC.

2. All electrical and electronic

products should be

disposed of separately from

the municipal waste stream

via designated collection

facilities appointed by the

government or the local

authorities.

3. The correct disposal of

your old appliance will help

prevent potential negative

consequences for the

environment and human

health.

4. For more detailed

information about disposal

of your old appliance,

please contact your city

office, waste disposal

service or the shop

where you purchased the

product.

EEE Compliance with Directive.

(for Turkey only)

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings.

Install in accordance with the

manufacturer’s instructions.

8. Do not install near any heat sources such

as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that

produce heat.

9. Do not defeat the safety purpose of

the polarized or grounding-type plug.

A polarized plug has two blades with

one wider than the other. A grounding

type plug has two blades and a third

grounding prong. The wide blade or the

third prong are provided for your safety.

If the provided plug does not fit into

your outlet, consult an electrician for

replacement of the obsolete outlet.

10. Protect the power cord from being

walked on or pinched particularly at

plugs, convenience receptacles, and the

point where they exit from the apparatus.

11. Only use attachments/accessories

specified by the manufacturer.

12. Use only with the cart, stand, tripod,

bracket, or table specified by the

manufacturer, or sold with the apparatus.

When a cart is used, use caution when

moving the cart/apparatus combination

to avoid injury from tip-over.

13. Unplug this apparatus during lightning

storms or when unused for long periods

of time.

14. Refer all servicing to qualified service

personnel. Servicing is required when

the apparatus has been damaged in any

way, such as power-supply cord or plug

is damaged, liquid has been spilled or

objects have fallen into the apparatus, the

apparatus has been exposed to rain or

moisture, does not operate normally, or

has been dropped.

Handling of the unit

Be careful not to spill water or other liquids on

the unit. Be cautious not to get combustible or

metallic material inside the body. If used with

foreign matter inside, the camera is liable to

fail or to get cause of fire or electric shock.

• Remove dust or dirt on the surface of the

lens with a blower.

• Use a dry soft cloth to clean the body. If it

is very dirty, use a cloth dampened with a

small quantity of neutral detergent then

wipe dry.

• Avoid the use of volatile solvents such

as thinners, alcohol, benzene and

insecticides.

They may damage the surface finish and/

or impair the operation of the camera.

Operating and storage

location

Avoid viewing a very bright object (such as

light fittings) during an extended period. Avoid

operating or storing the unit in the following

locations.

• Extremely hot or cold places (operating

temperature -20 °C to 50 °C, however, we

recommend that the unit be used within

a temperature range of 0 °C to 45 °C)

• Damp or dust place

• Places exposed to rain

• Places subject to strong vibration

• Close to generators of powerful

electromagnetic radiation such as radio

or TV transmitters.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This lightning flash with arrowhead symbol within an equilateral triangle is

intended to alert the user to the presence of uninsulated dangerous voltage

within the product’s enclosure that may be of sufficient magnitude to

constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the

user to the presence of important operating and maintenance (servicing)

instructions in the literature accompanying the product.

FCC WARNING: This equipment may generate or use radio frequency energy. Changes or

modifications to this equipment may cause harmful interference unless the modifications are

expressly approved in the instruction manual. The user could lose the authority to operate this

equipment if an unauthorized change or modification is made.

REGULATORY INFORMATION: FCC Part 15

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual, may cause harmful interference to radio

communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which

case the user will be required to correct the interference at his own expense.

• A suitable conduit entries, knock-outs or glands shall be provided in the cable entries of this

product in the end user.

• Caution: Danger of explosion if battery is incorrectly replaced. Replaced only with the same or

equivalent type recommended by the manufacturer. Dispose of used batteries according to

the manufacturer’s instructions.

• Holes in metal, through which insulated wires pass, shall have smooth well rounded surfaces

or shall be provided with brushings.

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

AB28

MODEL

LNP2810 series

LNP2810T series

Please read this manual carefully before operating

your set and retain it for future reference.

OWNER'S MANUAL

Network Dome Camera

1 2

Summary of Contents

Page 1 - Network Dome Camera

Item LNP2810 Series LNP2810T SeriesImage Sensor 4.5 mm (1/4 type) CMOSLens x28 Zoom, f = 3.5 mm to 98 mmResolution (Maximum) Up to 1280 x 720Day&N

Page 2 - Installation

Connecting Display deviceThe video signal connection between the camera and the monitor.ALARM input connectionConnect sensor and alarm devices to corr

LG LNP2810T User Manual

Browse online or download User Manual for Security cameras LG LNP2810T. LG LNP2810T Owner's manual

Summary of Contents

More documents for Security cameras LG LNP2810T

Comments to this Manuals

LG LNP2810T User Manual

Browse online or download User Manual for Security cameras LG LNP2810T. LG LNP2810T Owner's manual

Summary of Contents

More documents for Security cameras LG LNP2810T

Comments to this Manuals

Related products and manuals for Security cameras LG LNP2810T