LG VR5943L Owner's Manual download pdf (Page 25)

CLEANING THE DUST BIN

1. Open the dust bin cover by pressing the PUSH button

on the Roboking.

2. Grab the handle of the dust bin and pull it upward.

Separate the HEPA ﬁlter and the inside sponge ﬁlter by

removing the HEPA ﬁlter

To clean the dust bin ﬁlter, refer to page 23.

4. Lift the cover upward while pressing the separation

button on the dust bin.

5. Empty the dust bin and clean it with a cleaning brush

or under running water.

6. After cleaning with water, completely dry the dust bin

in a well-ventilated area out of the direct sunlight.

7. When you have completed cleaning the dust bin, close

the cover and replace the sponge ﬁlter and HEPA ﬁlter.

8. Put the dust bin into the Roboking and close the dust

bin cover.

If the dust bin is full, suction power can be weakened. Clean the dust bin before and after each cleaning ses-

sion. Clean the dust bin using the following sequence:

After cleaning, always mount the dust bin ﬁlters (HEPA ﬁlter, sponge ﬁlter) to the dust bin. If

they are not mounted, dust may enter the Roboking interior and cause product failure.

When dust bin ﬁlter (HEPA ﬁlter, sponge ﬁlter) is full the warning sound "empty the dust bin!"

may be generated. In this case, clean the ﬁlter by referring to "cleaning of dust bin ﬁlter" on

page 23.

Tip

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 35 36

No comments

LG VR5943L Owner's Manual Page 25