LG 50PA450C Owner's Manual download pdf (Page 35)

35

ENG

ENGLISH

PENTOUCH

Step of using the Pentouch Program

Follow the steps below to use the Pentouch

function.

1

Check the system requirements before

installation.

2

Install the Pentouch program from the

installation CD.

3

Pair the pen and the dongle.

4

Connect the PC and the TV.

5

Configure the PC screen.

6

Activate the Pentouch mode on the TV.

7

Start the Pentouch program.

System Requirements

Make sure that the program are installed properly

to allow proper operation of the touch pen.

Supported Operating System

Windows XP 32 bit

Windows Vista,

Windows 7

32 bit

64 bit

(Windows 7 Starter Edition is not supported.)

Recommended System Requirements for Pentouch



CPU: Dual-Core 2GHz or better



Memory: 1GB or more



HDD: 500MB or more



Display: Graphics card with 1024 x 768

via an RGB or HDMI output port



Windows 7 is recommend due to its support

of multi-touch.

NOTE



You must log in as an administrator to install

or remove the program.



Make sure to install the program found on

the CD provided.



You can also download this program from

the LG Electronics website.



Make sure to close all running applications

before installing the program.



Remove old version of the Pentouch

program installed on your PC before

re-installing or installing new version.

Installing the Pentouch Program

Follow the steps described in this manual to install

the program.

1

Prepare your computer and start it.

2

After the computer starts, insert the CD

provided. The installation screen appears

automatically.

(If the installation screen is not displayed

automatically, access My computer and then

click LG and index.htm to view the installation

screen.)

3

Click [Install the Pentouch Program] in the

installation window.

The default folder is used for installation.

A window appears to indicate that the

installation was completed successfully.

4

In Windows XP, the [Found New Hardware

Wizard] installs your program automatically.

5

Restart your computer after the installation.

NOTE



Disconnect the USB dongle first to install the

program.

Removing the Pentouch Program

If there is a problem with the Pentouch program

or an error occurs while using the program, follow

the steps below to remove the program, and then

reinstall them.

1

On your computer, select [Start]

→

[Control

Panel]

→

[Add/Remove Programs] to remove

the Pentouch program.

- The installed Pentouch program: LG Pentouch

TV

2

Click [Yes]. A window appears telling you that

the program has been removed.

3

Please reboot your PC after removing the

program.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 125 126

Comments to this Manuals

No comments