LG 37LK430 User Manual download pdf (Page 87)

ENGENGLISH

MAKING CONNECTIONS

Connecting to an audio system

Use an external audio system instead of the built-

in speaker.



If you use an external audio device

instead of the built-in speaker, set the TV

speaker feature to off (See p.74).

NOTE

Digital optical audio connection

Transmits the digital audio signal from the TV to an

external device. Connect the external device and

the TV with the optical audio cable as shown in the

following illustration.



Do not look into the optical output port.

Looking at the laser beam may damage

your vision.

NOTE



Avoid keeping a fixed image on the set’s

screen for prolonged periods of time. The

fixed image may become permanently

imprinted on the screen; use a screen

saver when possible.



There may be interference relating to

resolution, vertical pattern, contrast or

brightness in PC mode. Change the PC

mode to another resolution or change the

refresh rate to another rate or adjust the

brightness and contrast on the menu until

the picture is clear. If the refresh rate of

the PC graphic card can not be changed,

change the PC graphic card or consult the

manufacturer of the PC graphic card.



The synchronization input waveform for

Horizontal and Vertical frequencies are

separate.



We recommend using 1920x1080, 60

Hz(Except for 42/50PT****, 42/50PW****,

22/26/32LK33**, 19/26/32LV25**,

19/22LV23**), 1024x768, 60 Hz(Only

42/50PT****, 42/50PW****) 1360 x768, 60

Hz(Only 22/26/32LK33**, 19/26/32LV25**,

19/22LV23**) for the PC mode, this should

provide the best picture quality.



Connect the signal cable from the monitor

output port of the PC to the RGB (PC) port

of the TV or the signal cable from the HDMI

output port of the PC to the HDMI IN (or

HDMI/DVI IN) port on the TV.



Connect the audio cable from the PC to the

Audio input on the TV. (Audio cables are

not included with the TV).



If using a sound card, adjust PC sound as

required.



If the graphic card on the PC does

not output analogue and digital RGB

simultaneously, connect only one of either

RGB or HDMI IN (or HDMI/DVI IN) to

display the PC output on the TV.



DOS mode may not work depending on the

video card if you use an HDMI to DVI cable.



If you use too long an RGB-PC cable, there

may be interference on the screen. We

recommend using under 5m of cable. This

provides the best picture quality.

NOTE

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 141 142

Comments to this Manuals

No comments

LG 37LK430 User Manual Page 87

Comments to this Manuals

Related products and manuals for Plasma TVs LG 37LK430