LG N4B1N User Manual download pdf (Page 24)

. LG NAS Installation



LG NAS connection

For a particular IP address allocated from the Network IP administrator, installation

using an IP address, subnet mask, default gateway and allocated DNS information is

simple. Otherwise the LG NAS will automatically set up the network environment.

Connect devices as follows, referring to the user’s own network environment.

① Using the included LAN cables, connect LAN ports on LG NAS and network devices

(home router/router/switch/hub) to each other or directly plug them into the LAN

port on the PC.

A. If the network component (home router/router/switch/hub) is used to connect

the LG NAS (home router/router/switch/hub) to the PC, use the following

procedure.

Internet

Desktop PC

Notebook

LG NAS

home router/

router/switch/hub

B. If the LG NAS is connected directly to the PC without another network device,

it must be connected directly to the PC using a LAN cable,

and then the IP address must be set to 1.1.1.01 and the subnet mask to

...0.

LAN Cable

Desktop PC

LG NAS

* In this case, PC Internet may be disconnected

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 156 157

No comments

LG N4B1N User Manual Page 24